Operating Tips

BM 2609140646 07-09:BM 2609140646 07-09 7/29/09 2:19 PM Page 15

You will extend the life of your bits and do neater work if you always put the bit in contact with the work before pulling the trigger. During the operation, hold the tool firmly and exert light, steady pressure. Too much pressure at low speed will stall the tool. Too little pressure will keep the bit from cutting and cause excess friction by sliding over the surface. This can be damaging to both tool and bit.

DRILLING WITH VARIABLE SPEED

The trigger controlled variable speed feature will eliminate the need for center punches in

hard materials. The variable speed trigger allows you to slowly increase RPM. By using a slow starting speed, you are able to keep the bit from “wandering”. You can increase the speed as the bit “bites” into the work by squeezing the trigger.

DRIVING WITH VARIABLE SPEED

Variable speed drills will double as a power screwdriver by using a screwdriver bit in the drill mode. The technique is to start slowly, increasing the speed as the screw runs down. Set the screw snugly by slowing to a stop. Prior to driving screws, pilot and clearance holes should be drilled.

FASTENING WITH SCREWS

This procedure shown in (Fig. 9) will enable you to fasten materials together with your

Screw drills are available for screw sizes No. 6, 8, 10 and 12.

Cordless Drill/Screwdriver without stripping, splitting or separating the material.

First, clamp the pieces together and drill the first hole 2/3 the diameter of the screw. If the material is soft, drill only 2/3 the proper length. If it is hard, drill the entire length.

Second, unclamp the pieces and drill the second hole the same diameter as the screw shank in the first or top piece of wood.

Third, if flat head screw is used, countersink the hole to make the screw flush with the surface. Then, simply apply even pressure when driving the screw. The screw shank clearance hole in the first piece allows the screw head to pull the pieces tightly together.

FASTENING

WITH SCREWS

1. Drill 2/3 diameter and 2/3 of screw length for soft materials, full length for hard materials.

Screw

Apply a slight even pressure when driving screws.

2. Drill same diameter as screw shank.

3. Countersink same diameter as screw head.

Adjustable

Screw

Drill

The adjustable screw drill accessory will do all of these operations quickly and easily.

FIG. 9

DRILL BITS

Always inspect drill bits for excessive wear. Use only bits that are sharp and in good condition.

TWIST BITS: Available with straight and reduced shanks for wood and light duty metal drilling. High speed bits cut faster and last longer on hard materials.

DRILLING WOOD

Be certain workpiece is clamped or anchored firmly. Always apply pressure in a straight line with the drill bit. Maintain enough pressure to keep the drill “biting”.

-15-

26618-01, 26618BL, 26618B specifications

Bosch Power Tools has cultivated a reputation for engineering high-quality tools that cater to both professionals and DIY enthusiasts. Among their impressive lineup is the Bosch 26618B, 26618BL, and 26618-01 models, which combine power, versatility, and advanced technology.

The Bosch 26618B is a robust 18V cordless drill that provides users with exceptional performance. It features a 1/2-inch keyless chuck for easy bit changes, allowing for quick transitions between tasks. With a maximum torque of up to 600 in-lbs, this drill can effortlessly handle various materials, including wood, metal, and masonry. The two-speed planetary gearbox provides users with the flexibility to choose between high speeds for rapid drilling and low speeds for improved torque when driving screws.

Equipped with Bosch's well-known2800 RPM motor, the 26618B delivers consistent power, enabling users to complete projects efficiently. The integrated LED work light illuminates dark workspaces, enhancing visibility during operations. Additionally, the ergonomic design of the tool, complete with a soft-grip handle, ensures comfort during prolonged use, reducing fatigue.

The 26618BL offers the added benefit of a Bluetooth connectivity feature, making it a high-tech choice for tool users. This model includes the same powerful motor and torque as the 26618B but incorporates advanced wireless technology that allows users to connect to the Bosch Toolbox app. This feature makes it easier to track battery performance and receive maintenance reminders, ensuring the longevity of the tool.

Meanwhile, the Bosch 26618-01 model rounds out this line with a complete kit that includes a battery and charger, providing everything a user needs to get started right away. This model maintains the same high standards set by its counterparts, combining durability with innovative features.

All these units share Bosch’s commitment to producing tools that are not only powerful but also easy to use. The advanced lithium-ion battery technology ensures extended run time and a longer lifespan, making these tools a reliable choice for demanding projects. With their blend of innovative technology, user-friendly design, and dependable performance, the Bosch 26618B, 26618BL, and 26618-01 models are essential additions to any toolbox, empowering users to tackle their projects with confidence and precision.

Bosch Power Tools 26618-01, 26618BL manual Operating Tips

Models: 26618-01 26618BL 26618B