Maintenance, Cleaning | Bosch Power Tools 26618-01, 26618BL specification

! WARNING

BM 2609140646 07-09:BM 2609140646 07-09 7/29/09 2:19 PM Page 17

Maintenance

Service

NO USER SERVICEABLE

PARTS INSIDE. Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires and components which could cause serious hazard. We recom- mend that all tool service be performed by a Bosch Factory Service Center or Authorized Bosch Service Station. SERVICEMEN: Disconnect tool and/or charger from power source before servicing.

BATTERIES

Be alert for battery packs that are nearing their end of life. If you notice decreased tool performance or significantly shorter running time between charges then it is time to replace the battery pack. Failure to do so can cause the tool to operate improperly or damage the charger.

TOOL LUBRICATION

Your Bosch tool has been properly lubricated and is ready for use.

CARBON BRUSHES

The brushes and commutator in your tool have been engineered for many hours of dependable service.

If your tool runs sporadically, loses power, makes unusual noises or runs at a reduced speed, check the brushes. To continue using the tool in this condition will permanently damage your tool.

Check both brushes. Usually the brushes will not wear out simultaneously. If one brush is worn out, replace both brushes.

To check brushes: Disconnect battery pack from tool. Rotate brush cap at the rear part of housing counter-clockwise with a coin or screwdriver and remove cap (Fig. 10).

Lift out the brushes; note which way they face, so that the brushes can be returned to their original position. New brushes can also be inserted turned 180º. Clean the brush holder openings with compressed air or a clean cloth and replace the brushes and brush covers.

After replacing brushes the tool should be run at no-load and run it freely at full speed for 2

FIG. 10

BRUSH

CAP

minutes before using the tool. This will allow the brushes to “seat” properly and will give you more hours of life from each set of brushes.

Only genuine Bosch replacement brushes specially designed for your tool should be used.

D.C. MOTORS

The motor in your tool has been engineered for many hours of dependable service. To maintain peak efficiency of the motor, we recommend it be examined every six months. Only a genuine Bosch replacement motor specially designed for your tool should be used.

Cleaning

To avoid accidents, always disconnect the tool and/or charger from the power supply before

cleaning. The tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when cleaning tools with compressed air.

Ventilation openings and switch levers must be kept clean and free of foreign matter. Do not attempt to clean by inserting pointed objects through opening.

!CAUTION Certain cleaning agents and solvents damage

plastic parts. Some of these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents, ammonia and household detergents that contain ammonia.

-17-

26618-01, 26618BL, 26618B specifications

Bosch Power Tools has cultivated a reputation for engineering high-quality tools that cater to both professionals and DIY enthusiasts. Among their impressive lineup is the Bosch 26618B, 26618BL, and 26618-01 models, which combine power, versatility, and advanced technology.

The Bosch 26618B is a robust 18V cordless drill that provides users with exceptional performance. It features a 1/2-inch keyless chuck for easy bit changes, allowing for quick transitions between tasks. With a maximum torque of up to 600 in-lbs, this drill can effortlessly handle various materials, including wood, metal, and masonry. The two-speed planetary gearbox provides users with the flexibility to choose between high speeds for rapid drilling and low speeds for improved torque when driving screws.

Equipped with Bosch's well-known2800 RPM motor, the 26618B delivers consistent power, enabling users to complete projects efficiently. The integrated LED work light illuminates dark workspaces, enhancing visibility during operations. Additionally, the ergonomic design of the tool, complete with a soft-grip handle, ensures comfort during prolonged use, reducing fatigue.

The 26618BL offers the added benefit of a Bluetooth connectivity feature, making it a high-tech choice for tool users. This model includes the same powerful motor and torque as the 26618B but incorporates advanced wireless technology that allows users to connect to the Bosch Toolbox app. This feature makes it easier to track battery performance and receive maintenance reminders, ensuring the longevity of the tool.

Meanwhile, the Bosch 26618-01 model rounds out this line with a complete kit that includes a battery and charger, providing everything a user needs to get started right away. This model maintains the same high standards set by its counterparts, combining durability with innovative features.

All these units share Bosch’s commitment to producing tools that are not only powerful but also easy to use. The advanced lithium-ion battery technology ensures extended run time and a longer lifespan, making these tools a reliable choice for demanding projects. With their blend of innovative technology, user-friendly design, and dependable performance, the Bosch 26618B, 26618BL, and 26618-01 models are essential additions to any toolbox, empowering users to tackle their projects with confidence and precision.

Bosch Power Tools 26618-01, 26618BL manual Maintenance, Cleaning

Models: 26618-01 26618BL 26618B