BM 2609932842
CLEANING AND EMPTYING
THE DUST CANISTER
It is recommended to loosen dust from the microfilter by gently striking it against a solid surface (Fig. 7).
To empty, lift lid of canister. Knock excess dust out of the micro filter, or remove dust with your fingers or a soft brush (Fig. 8).
You may notice that all the dust may not come out of the canister. This will not affect sanding performance but will reduce dust collection efficiency.
NOTE: Do not wash the micro filter with soap and water. Dust may become more firmly lodged in the pores, which will reduce dust collection, and damage the micro filter.
FIG. 7 |
| FIG. 8 |
|
|
|
ATTACHING VACUUM HOSE
When the canister is removed from the tool, an (optional) RS006 vacuum hose adapter can be attached to the dust port. To use this feature, attach the vacuum hose adapter to dust port,
and attach a Bosch vacuum cleaner hose to the adapter. For connecting the adapter to a
FIG. 9
RS006 VACUUM | VAC002 OR |
HOSE ADAPTER | VAC024 |
OR
1-1/2”
DUST | BOSCH |
PORT | VACUUM HOSE |
Operating Instructions
TRIGGER "ON-OFF" SWITCH
To turn the tool "ON" squeeze the trigger switch. To turn the tool "OFF", release the trigger switch, which is spring loaded and will
return to the "OFF" position automatically.
To increase switch life, do not turn switch on and off while tool is under load (Fig. 1).
