Adjustments

FIG. 6

 

!WARNING Disconnect battery pack from tool before performing any assembly,

adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

NOTE: Your compound miter saw was completely adjusted at the factory. However, during shipment, slight misalignment may have occurred. Check the following settings and adjust if necessary prior to using this compound miter saw.

3

4

Blade Square to Table (90°)

1. Rotate table 1 to 0° position and lock in place.

1

2

 

 

2.Lower the blade 2 and engage the lock pin 3. Use a combination square 4 to check blade squareness to

table. Place the square on the table and press it against

FIG. 7

the blade. If the blade does not contact the full length of

 

the square, (Figure 6) follow the alignment procedure.

 

90° Blade Alignment

a.Move sliding fence to proper position. (See Sliding

Fence on page 54.)

b. Loosen bevel lock handle 5.

c.Loosen jam nut 6 using blade wrench supplied in the handle, and lower 0° stop screw 7 with the

3 mm hex wrench provided.

d. Grasp carrying handle, move the head assembly left or right until blade makes contact with the full length of the square.

e.Tighten bevel lock handle 5.

f.Adjust 0° stop screw 7 so that the hex screw head

hits the 0° stop at the same time the blade makes contact with the full length of the square. Tighten jam nut 6 (Figure 7).

6

7

5

34

Page 33 Page 35
Page 34
Image 34
Bosch Power Tools 3918, 3924-24 manual Blade Square to Table, Blade Alignment
Page 33 Page 35

3924-24, 3918 specifications

Bosch Power Tools has long been a leader in innovation and quality within the power tool industry, and its models 3918 and 3924-24 are prime examples of their commitment to performance and reliability. These tools are designed for both professionals and DIY enthusiasts, providing efficient solutions for a variety of tasks.

The Bosch 3918 is primarily a reciprocating saw that features a robust 6.5-amp motor, delivering impressive power for cutting through wood, metal, and other materials. One of its standout features is the tool-less blade change system, which allows users to switch blades quickly and easily without needing additional tools. This is not only time-saving but also enhances the user experience by minimizing downtime between cuts.

The saw also boasts a variable speed dial that can reach up to 2,700 strokes per minute, giving users optimal control over their cutting tasks. The pivoting shoe provides increased stability and allows for precise cuts in various applications. Additionally, the saw includes an electronic motor protection system, which helps prevent overheating and extends the lifespan of the tool.

On the other hand, the Bosch 3924-24 is a powerful angle grinder. With a 6.0-amp motor, it delivers high performance while being compact and lightweight. The grinder comes with a soft grip handle, making it comfortable for extended use. Its one-touch guard allows users to adjust the guard without any tools, thus enhancing convenience during operations.

This model is equipped with a direct-drive motor that increases torque and ensures that it works efficiently under load. The 3924-24's efficient dust management system minimizes dust and debris, providing a cleaner workspace and improving visibility during operations. Additionally, the grinder features a two-position side handle for added control and stability, making it suitable for a variety of grinding, cutting, and polishing applications.

Both Bosch Power Tools models, 3918 and 3924-24, exemplify the brand's commitment to quality, safety, and user ergonomics. Their advanced features, robust construction, and innovative technologies make them indispensable tools for any serious craftsman or home improvement enthusiast. Bosch continues to enhance its tools with practical features that reflect the needs of its users, ensuring that professionals get the results they demand while maintaining ease of use.
Top Page Image Contents