Bosch Power Tools 400 Series XPR Getting to Know Your Rotary Tool, Unpacking & Checking Contents

GETTING TO KNOW YOUR ROTARY TOOL

Unpacking & Checking Contents
! WARNING	To avoid injury from unex-
	pected starting or electri-

cal shock, always remove plug from wall outlet when tool is not in use.

Separate all loose parts from packing materi- als and check each item with the contents listed on the carton to make sure all items are accounted for before discarding any packing material.

IMPORTANT! If any parts are missing, or if you require any assistance with these instructions, please contact the Dremel™ Consumer Service at:

1-800-437-3635

or check our website at www.Dremel.com.

Description

The 400 Series XPR™ Rotary Tool incorpo- rates both high-speed and performance to

serve as a carver, grinder, polisher, sander, cutter, power brush, drill, and more.

The tool utilizes a small, but effective DC motor. The large variety of available Dremel™ accessories includes abrasive wheels, drill bits, wire and nylon brushes, engraving and carving cutters, router bits, polishing points and more. The ability to add different Dremel™ attachments adds to the multi-faceted uses of the tool. The variety of projects you can do with the tool is limitless. The 400 Series XPR Rotary Tool is a high- speed tool and operates at speeds 5,000 to 35,000 RPM. (A typical electric drill operates only up to 2500 RPM!). When used with Dremel™ accessories and attachments, the 400 Series XPR rotary tool’s high speed per- formance allows you to work on even the most demanding projects without having to exert undue pressure on the tool. The tool does the work for you.

Collet Wrench

	Collet Nut
	Collet
	Shaft Lock Button
Housing Cap	On/Off Switch
	Variable Speed Dial

Ventilation Openings

Brush Cover

(one each side)

Hanger Power Cord

5