operation

Connecting Air Supply

WARNING Firmly grasp the hose in hand when installing hoses. If hose is not held firmly or correctly installed hose may whip

and injure personnel in the operating area. Installing Hoses:

1.Grasp the hose at the quick connect plug and push the plug into the quick connect body.

Coupler will snap into place.

150

20

 

Fig. 4

2.Grasp the hose and pull to ensure coupler is seated.

Fig. 5

Operating Temperatures

Operating temperatures are between 32ºF and 104ºF (0ºC and 40ºC). If operating outside rec- ommended temperatures, unit may have difficulty starting and will cause additional wear on compo- nents.

WARNING Disconnect the compressor from the power source, drain air tanks and allow it to cool before making

adjustments, moving the compressor, leaving

the work area, performing maintenance or storing the compressor. Such precautionary safety measures reduce the risk of injury.

Shutting down the compressor

1.Move the engine switch to the “off” position. (refer to the Engine Manual accompanying this unit.)

2.Turn regulator until output pressure shows 0 psi,

3.Remove hose and hose assembly. See “disconnecting air supply” below.

4.Drain air from the air tanks by releasing air by pulling the safety release valve.

5.Once the air tank pressure is under 20 psi., open the drain valve on the control panel to drain moisture from the tanks. See “Draining

Tanks” below.

6.Allow the compressor to cool down before storing.

Disconnecting Air Supply

Disconnecting Hoses:

1.Ensure regulated pressure gauge reads 0 psi (0 kPa).

2.Pullcoupleronquickconnectbodybacktorelease quick connect plug on hose. (See figure 5)

Draining Tanks

1. Place the compressor on a level surface.

WARNING Ensure that the compressor is on a level surface. If compressor is not level, water will not drain from tanks causing

corrosion, which may cause the tanks to burst.

2.If pressure is greater than 20 psi, use safety relief valve to reduce tank pressure.

3.Ensure that no personnel are in the drain discharge area behind compressor.

WARNING Do not direct air stream at people or animals. High pressure air can propel dust and debris at high speed. Compres-

sor air from the compressor can contain water, oil, metal particles, or other contaminants which can cause serious injury.

4.Turn drain valve on control panel 90° counterclockwise.

WARNING Do open drain valve with pressure greater than 20 psi in tanks. Such

precautionary measures reduce the risk of injury. 5. When tanks are empty, close valve.



Page 8 Page 10
Page 9
Image 9
Bosch Power Tools CGT8-65W Connecting Air Supply, Grasp the hose and pull to ensure coupler is seated, Draining Tanks
Page 8 Page 10

CGT8-65W specifications

The Bosch Power Tools CGT8-65W is a versatile and robust tool designed for both professional and DIY enthusiasts who demand precision and power in their projects. This tool is part of Bosch's innovative line of power tools, known for their reliability, efficiency, and advanced technology.

One of the standout features of the CGT8-65W is its powerful motor, providing consistent performance for a variety of applications. Whether you are cutting, drilling, or fastening, the motor ensures that the tool delivers optimal power without compromising on speed or precision. This makes it particularly suitable for tasks that require a high level of accuracy and control.

The CGT8-65W is engineered with advanced battery technology, allowing for extended runtime and quick charging capabilities. The lithium-ion battery ensures that users can work longer without interruptions, making it ideal for those large projects where time efficiency is crucial. Furthermore, the tool features an energy-saving mode that conserves battery life, allowing users to maximize their working time.

In terms of usability, the CGT8-65W incorporates an ergonomic design that prioritizes user comfort. The soft-grip handle reduces vibration and fatigue, enabling extended use without discomfort. This feature is particularly valuable for professionals who may use the tool for several hours at a stretch. Additionally, the tool's lightweight construction makes it easy to handle and maneuver, adding to its overall convenience.

The CGT8-65W also boasts a cooling system that prevents overheating during heavy use. This technology not only prolongs the life of the tool but also enhances its performance, ensuring that it operates efficiently under demanding conditions. Safety features are integrated into the design, including a safety switch that prevents accidental activation, providing peace of mind for users.

Another noteworthy characteristic of the CGT8-65W is its versatility. It is compatible with a wide range of accessories and attachments, enabling users to tackle various tasks with ease. Whether you are working with wood, metal, or plastic, this tool can adapt to meet the demands of each project.

Overall, the Bosch Power Tools CGT8-65W stands out as an exceptional tool that combines power, comfort, and technology. With its high-performance motor, advanced battery management, ergonomic design, and safety features, it represents an ideal choice for anyone looking to enhance their toolkit with a reliable, high-quality power tool. Whether you’re a seasoned professional or an eager DIYer, the CGT8-65W is engineered to deliver excellent results every time.
Top Page Image Contents