daf220_bu_2609140572_003.fm Seite 17 Montag, 8. September 2008 2:22 14
17
4)Set the Miter and Bevel Angles on the Saw, taking care to prop- erly orient the workpiece ac- cording the saw’s instruction manual.
5)Return to the Normal Measur-
ing Mode
–Press the ON/CLEAR/OFF but- ton (for less than 1 second) to exit the Compound MTR mode and return to the normal mea- suring mode.
–The current angle appears in the main display.
Notes:
–When dealing with compound angle situations other than the cutting of crown molding laid flat, one of the measured struc- ture or workpiece angles should be treated as though it were a spring angle (SPR) and the other as the corner angle (CNR).
–If a measured angle is outside the range of 0° to 180°, “– – –
–To exit the COMPOUND MTR mode, press ON/CLEAR/OFF for less than 1 second.
–The DAF220 Miterfinder™ pro- vides miter angle values for saws with miter scales that have 0° as the setting for a perpendicular cut. When making miter cuts us- ing tools that have 90° as the set- ting for perpendicular cuts (such as many table saw miter gauges), the MTR angle needs to be sub- tracted from 90° to calculate the setting needed on such saws:
90° – MTR = correct miter set- ting for saws with 90° perpen- dicularity setting.
| Bosch Power Tools | 2 609 140 572 (8.9.08) |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
