Operating Instructions
Audio Settings
VOLUME
Your Jobsite Stereo has 20 selectable preset volume settings. To adjust the VOLUME level, turn Volume/Bass/Treb Dial clockwise or counterclockwise to desired volume level.
Equalizer
Your Jobsite Stereo has 5 selectable preset equalizer settings and custom setting which allow you to custom select the level of Bass and Treble tones.
Pressing Equalizer repeatedly will select through 5 equalizer and custom settings, illuminating each setting on the LCD: JAZZ, ROCK, POP, CLASSICAL, and CUSTOM.
To set CUSTOM Bass and Treble settings, follow the steps below:
1.Press Equalizer repeatedly until “CUSTOM” is selected. or, simply press the CUSTOM button once.
2.Press Custom button once and “BAS” (for BASS) along with the bass level number will flash on the LCD display.
3.Turn Volume/Bass/Treb Dial clockwise or counterclockwise to desired bass level.
4.Press Custom button twice and “TRE” (for TREBLE) along with the treble level number will flash on the LCD display.
5.Turn Volume/Bass/Treb Dial clockwise or counterclockwise to desired treble level.
6.Press Custom button once more to set levels to memory. Your custom bass and treble settings are now saved, and “TRE” and treble level number stop flashing and disappear from the LCD display.
Note: Bass and Treble settings each have a range of 0 (min) to 10 (max) levels.
STEREO
When a strong FM signal is received by the FM tuner, “ST” will illuminate on the LCD display. If a weak signal is received by the FM tuner, “ST” will not illuminate on the LCD display. To improve the sound of a weak station, adjust the external antenna or position your Jobsite Stereo in a different location.
Radio Function
TO SELECT BAND AND STATIONS
This tuner is operated in standard AM frequency from 530- 1710kHz and in standard FM frequency from
1.Press Source button repeatedly until “FM” or “AM” is selected.
2.Turn Tune +/- Dial clockwise or counterclockwise to tune into desired radio frequency.
3.To “Seek”, press and hold 
/-Seek
button to seek up until a station with a strong signal is received.
Note: If there is no station received when the unit stops seeking, repeat the steps mentioned above to seek for the preferred stations.
TO PRESET STATIONS
Up to 20 stations for FM and 10 stations for AM can be preset. Follow the steps below to preset a station:
1.Tune in to desired radio station using Tune +/- Dial.
2.To preset desired station, press MEMORY button once. PRESET and the preset number will flash on the display.
3.Press either the 
/-Seek
buttons once to move to the desired station preset.
4.Press Memory button again to save desired station to desired station preset to memory. PRESET and the station preset number will stop flashing.
Note: Once 20 stations for FM or 10 stations for AM are set, the first preset station will be replaced if you continue to preset another station.
TO RETRIEVE PRESET STATIONS
1.Press the 
/-Seek
buttons once to search down or up for the desired preset station.
AUX Function
If you want to use an external audio player such as a digital media player or portable CD player, the unit has two Auxiliary Ports to accept these sources.
AUX 1 intended for use when it is more desirable to control the external player from outside the unit.
1.Press Source button repeatedly until AUX 1 is illuminated on the LCD display.
2.Open AUX 1 IN port cover on the left side of the unit.
3.Insert plug from your cord into the AUX 1 IN jack.
4.Connect the other end of the cord into the headphone out or Aux out port on your external audio player.
5.Play the external audio source as you normally would.
6.Use the Volume/Bass/Treb Dial to adjust the volume.
AUX 2 intended for use when it is more desirable to secure the external player inside the Digital Media Bay (See Digital Media Bay) for increased convenience and protection.
1.Press Source button repeatedly until AUX 2 is illuminated on the LCD display.
2.Open Digital Media Bay Door.
3.Insert plug from your cord into the AUX 2 IN jack.
4.Connect the other end of the cord into the headphone out or Aux out port on your external audio source.
5.Play the external audio source as you normally would.
6.Use the Volume/Bass/Treb Dial to adjust the volume.
Note: You can not control your digital media player device (play, pause, track, etc.) through the control panel on the front of your Jobsite Stereo when your device is connected through an Auxiliary port.
8
