USB Function
Your Jobsite Stereo has a powered USB port located inside the Digital Media Bay that can be used to play digital music files from a USB mass storage device as well as charge most
USB - PLAYING DIGITAL MUSIC
The USB port is designed to work with USB mass storage devices only* and is compatible with mp3 and wma file types. Follow the steps below to play your digital music files from your USB device:
1.Press Source button repeatedly until USB is illuminated on the LCD display.
2.Open Digital Media Bay Door
3.Insert USB mass storage device into USB port. Numeric display on right side of LCD display will flash while USB device is being read. When ready, numeric display will show the track to be played and the number of tracks stored on your USB device. Close Digital Media Bay Door.
4.To PLAY a track, press 
button once. Press again to
PAUSE.
5.To skip to the previous track press the 
/-Seek
button once.
6.To randomly play your digital music tracks press the
button once. The 
icon will illuminate in the LCD display.
7.To play your digital music tracks in a continuous loop press
the 
button twice. The 
icon will illuminate in the LCD display.
8.To repeat a digital music track press the 
button three times. The 
icon will illuminate in the LCD display.
To remove your USB device simply pull the device slowly outward until it is free from the USB port.
Note: For errors with USB when playing music please reference the Troubleshooting Guide.
USB - CHARGING
The USB port is designed to charge most
1.Make sure your Jobsite Stereo is plugged into a 120V power source.
2.Insert the USB end of your device cable into the USB port inside the Digital Media Bay. Insert the other end of your device cable into your device. Your device should begin to charge.
Note: With your Jobsite Stereo plugged into a 120V power source your
SD/MMC Card Function
Your Jobsite Stereo has a SD/MMC expandable memory card port located inside the Digital Media Bay that can be used to play digital music files.
SD/MMC - PLAYING DIGITAL MUSIC
The SD/MMC port is designed to work with most SD/MMC cards and is compatible with mp3 and WMA file types. Follow the steps below to play your digital music files from your SD/MMC memory card device:
1.Press Source button repeatedly until SD is illuminated on the LCD display.
2.Open Digital Media Bay Door
3.Insert SD/MMC card device into SD/MMC port until the card is secure. Note: For proper insertion, label side of the SD/MMC card should be facing right. Numeric display on right side of LCD display will flash while SD/MMC card device is being read. When ready, numeric display will show the track to be played and the number of tracks stored on your SD/MMC card device. (See figure below Close Digital Media Bay Door.
AUX 1 IN
LINE OUT
AUX 1 | 12V |
| |
IN | LINE |
| |
| OUT |
SD | 250V |
/ | 1AMP |
MMC | FOR 12V |
| FUSE |
| OUTLET |
| USB |
AUX 2 IN |
|
4. To PLAY a track, press 
button once. Press again to
PAUSE.
5. To skip to the previous track press the 
/-Seek
button once.
6. To randomly play your digital music tracks press the 
button once. The 
icon will illuminate in the LCD
display.
7. To play your digital music tracks in a continuous loop within
the same folder press the 
button twice. The 
icon will illuminate in the LCD display.
8. To repeat a digital music track press the
button three
times. The 
icon will illuminate in the LCD display.
To remove your SD/MMC memory card simply depress the card in its slot and the card will eject.
Note: For errors with SD/MMC memory cards when playing music please reference the Troubleshooting Guide.
9
