Bosch Power Tools PB360S-C manual LCD Display, Setting the Clock

				LCD Display
	1	2	3	4		5	20	19	16	15
6
11	12	13	14	18	17		24	9		10	25

21

22

23

7

8

1.JAZZ – Illuminates when Jazz is selected in Equalizer.

2.ROCK – Illuminates when Rock is selected in Equalizer.

3.POP – Illuminates when Pop is selected in Equalizer.

4.CLASSICAL – Illuminates when Classical is selected in Equalizer.

5.CUSTOM – Illuminates when Custom is selected in Equalizer or when Custom button is pressed.

6.NUMERIC – Shows the clock time once it has been set and the radio station during tuning.

7.ST (STEREO) – Illuminates when the radio station is broadcasting in Stereo channel.

8.NUMERIC – Shows FM or AM station frequency in tuner mode, or running time of digital music track.

9.CHARGING – Flashes when the unit is charging the battery.

10.BATTERY icon – Indicates that a battery is in the unit. This icon flashes when the battery is almost dead.

11.FM – Indicates FM band in tuner mode.

12.AM – Indicates AM band in tuner mode.

13.AUX 1 – Illuminates when you select AUX 1 mode for playing external media player device.

14.AUX 2 – Illuminates when you select AUX 2 mode for playing external media player device (inside Digital Media Bay).

15.NUMERIC – Shows the number of a preset radio station in tuner mode, or the track being played and number of tracks stored on your USB or SD/MMC card device.

16.PRESET – Illuminates when preset radio station is selected and flashes when setting station presets to memory.

17.SD – (SD/MMC Card) Illuminates when you select SD/MMC Card mode.

18.USB – Illuminates when you select USB mode.

19.BAS – Illuminates when you set the desired Bass level.

20.TRE – Illuminates when you set the desired Treble level.

21.RANDOM – Icon Illuminates when in Random mode (USB and SD/MMC devices only).

22.REPEAT FOLDER – Icon illuminates when in Repeat Folder mode (USB and SD/MMC devices only).

23.TRACK REPEAT – Icon illuminates when in Track Repeat mode (USB and SD/MMC devices only).

24.PM – Illuminates when time setting is in PM mode.

25.TEMPERATURE icon - When the radio unit is NOT plugged into a 120V power source, but a battery is installed properly in the battery/charger bay, this icon will illuminate and flash if the battery temperature is too hot (approximately 50 celsius or more) or too cold (approximately -10 celsius or less). If the battery temperature exceeds 70 celsius, the radio unit will shut down in order to protect the battery from damage. When the battery temperature reaches the normal operating temperature range (see Battery/Charger Rules), the radio unit can be powered on and resume normal function. The TEMPERATURE icon will NOT illuminate or flash when the radio unit is plugged into a 120V power source.

Setting the Clock

When the AC plug or the battery pack is inserted, the unit defaults to standby mode and the LCD shows “12:00”. Follow the steps below to set the correct local time.

1.Press and hold Clock button on the unit and “hour” is activated and flashes.

2.Turn /-Seekor Seek+/ to choose the correct hour number. For “PM” setting, turn TUNE DIAL until “PM” illuminates in the LCD display.

3.Press Clock button once to set the hour and “minute” is activated and flashes.

4.Turn /-Seekor Seek+/ to choose the correct minute number.

5.Press CLOCK button once to save the clock setting.

Note: 2 AA batteries are needed to keep time current when unit is not plugged in. Replace AA batteries when unit no longer keeps proper time. (See charging AA clock battery section.)

6