Setting Up
Set up the remote control
1.Slide open the battery compartment on the back of the remote (Figure 12).
2.Insert 3 AA or
3.Slide the battery compartment cover back into place.
Replace the batteries when the remote control stops operating or its range seems reduced. Alkaline batteries are recommended.
Note:Do not change the settings of the
3 AA batteries
Battery compartment cover
Miniature switches
Figure 12
Installing the remote control batteries
Set radio channel spacing on dual voltage systems
Dual voltage music centers (which include both 120V and 230V power packs) can be set for two types of AM and FM channel spacing.
•10 kHz for AM and 200 kHz for FM (common to North America)
•9 kHz for AM and 50 kHz for FM (common to Europe)
Your dual voltage music center is preset for North American spacing. Select the channel spacing most appropriate for your area.
To change between North American and European channel spacing:
1.Turn the music center off.
2.Press and hold the ERASE key (on the music center control panel) for three seconds.
The display flashes PROGRAM and indicates 
for North American spacing or 
for European spacing.
3.Press SOURCE SELECT (on the music center control panel) while holding the ERASE
key. The display flashes PROGRAM and the setting changes from 
to 
. While
holding ERASE, press SOURCE SELECT again to change from 
to 
.
10 | October 29, 2001 | AM178934_09_V.pdf |
