English

DeutschEspañol FrançaisItliano Nederlands Svenska

SETUP

Insert this plug into the power connector that is

2. marked~on the Acoustimass® module.

3.Plug the other cable end into the AC (mains) power.

CAUTION: Bose recommends using a safety agency- approved surge protector on all electronic equipment. Voltage variations and spikes can damage electronic components in any system.

Note: On some systems, the Acoustimass module includes one of two controls.

On 220-240V models only, turn the POWER switch to on ( l ).

On dual-voltage systems only, set the voltage switch for the power that is appropriate to the region where you use the system.

Note: Surge protectors are available at most electronics stores.

4. Continue with 9 on the next page.

29

Page 33
Image 33
Bose 3.2.1 manual Continue with 9 on the next