CONTROLLING EXTERNAL SOURCES
Svenska | Nederlands | FrançaisItliano | DeutschEspañol | EnglishDansk |
CONTROLLING EXTERNAL SOURCES
When you complete these settings and select VCR as the source, you can now use the VCR On/Off button and press Play, Pause, or Stop and Seek to control your VCR or other video recorder. On some DVRs, pressing Shuffle and Repeat buttons will allow you to skip backward or forward quickly.
Note: If your LIFESTYLE® remote control has the 
symbol above the Library button, it also
has a record button (
) near the bottom of the remote. Use that button to set your VCR/DVR to record.
For AUX control
If you have a component connected to the AUX input on your media center, you can set your LIFESTYLE® remote to control it, although on and off control is not an option.
If you do not have a component connected to AUX, you can still control another device by selecting it from the list of AUX device choices: Changer, Satellite, Cable, DVR, TV, or VCR.
To exercise this control, you must press the AUX source button first.
Note: For general guidelines on using the LIFESTYLE® System menu, refer to “Using System
Menus” on page 32.
Follow the AUX process below:
Turn on your component. Turn on the TV and be sure to select the Video input on the TV for the media center. Then using the LIFESTYLE® remote control, press AUX and continue:
1.Identify the device:
•From the Remote Control options in the System menu, select AUX Device.
•Move to the right and up or down in the list to select a component by pressing Enter.
2.Identify the brand:
•In the menu options on the left, select AUX Brand.
•Move to the right and up or down in the alphabetical list to locate your brand.
•Press Enter to select the brand.
3.Choose the device code:
•From the menu options on the left, select AUX Code.
•Move right to select the first code.
•Press the Play or Channel/Track up button on the LIFESTYLE® remote control.!
If the component responds, press other buttons to make sure important functions on the component also work. If the component does not respond, select a different code and try again.
•When you have chosen the best code for your component, press Enter.
Press System or Exit to leave the System menu.
Assigning channel control to the TV input device
If you always change channels on your cable or satellite box, and never on your TV, you can choose to set up your LIFESTYLE® system for your cable or satellite box when you select TV as the source. In this case, you need to connect your cable or satellite to the TV Audio IN on the media center. You will also need to select that option in the System menu.
Note: For general guidelines on using the LIFESTYLE® System menu, refer to “Properties that you can adjust” on page 32.
30
! !
