Setting Up
Check the connections
Check all connections from the receiver to the Acoustimass® module and the module to the cube speakers, making sure the two speakers with black terminals are connected as front speakers (Figure 11). Check to be sure all speakers are connected to the proper terminals according to their position in your room (Figure 12).
At the receiver, make sure the wires are connected in phase (+ to + and – to
Be sure to correct any wiring problems before you plug your receiver in and turn it on.
Figure 11
Black connector and terminal marked L/R on both the front left and front right speakers
L/R
RCL
Figure 12
Completed connections
FRONT SPEAKERS | |
R | L |
SURROUND SPEAKERS |
L REAR R CENTER |
OUTPUTS
TO CUBE SPEAKERS
L | C | R | LS | RS |
LEFT | CENTER | RIGHT | LEFT | RIGHT |
|
|
| SURROUND | SURROUND |
INPUTS
FROM RECEIVER OR AMPLIFIER
L |
| C | R |
| LS |
| RS | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RSLS
CAUTION:
Do not allow exposed wires to brush against each other; this could damage your receiver.
12 | December 20, 2001 | AM189815_04_V.pdf |