Setting Up
Attach the module end cover, if needed
The module end cover is designed to hide the cabling and extend the smooth, clean lines of the Acoustimass® module. However, because the cover has a beveled surface, you cannot stand the module on that end with the cover in place.
If you plan to use the cover, attach it to the cable end after all connections have been checked (Figure 13). Gently push the end cover into the grommets on the Acoustimass module.
Your set up is complete. Enjoy your
Figure 13
The module end cover fits over the cables
AM189815_04_V.pdf | December 20, 2001 | 13 |