Bose AM262840 manual Setting up a Zone 2 remote control, Setting Zone 2 Protocol

Setting Up Your Lifestyle® Stereo Amplifier

Figure 9

Setting up a Zone 2 remote control

Setting up the remote control

You need to set up a second remote control to operate the ZONE 2 output.

1.Remove the remote control battery cover and locate the miniature switches (Figure 9).

2.Make sure that the house code settings (switches 1, 2, 3, and 4) match those in your first remote.

3.Make sure switches 5, 7, and 8 are up, and switches 6 and 9 are down.

Note: Refer to your Lifestyle® system owner’s guide for more information on operating your system in more than one room.

ON

Figure 9a

Setting Zone 2 Protocol

For the SA-1 amplifier to work properly with a Lifestyle® media center, you will need to set the Zone 2 Proto- col to Legacy mode (Figure 9a).

1.While your Lifestyle® DVD system is on, press the Settings button on your remote control. This will open the on-screen display.

2.Scroll down with the down-arrow button and select System Setup using the enter button.

3.You will now see a menu entitled System Setup (1 of 3). Scroll down to “more...”. Continue to scroll down through (2 or 3) to (3 of 3). The last item on System Setup (3 of 3) is Zone 2 Protocol.

4.Use the right-arrow button to change the protocol from Normal to Legacy.

5.Before using Zone 2, shut off the system and turn it on again; this ensures that the Zone 2 Protocol is reset to Legacy mode.

Setting Zone 2 Protocol

On		Mute	Mute
Off		All
	SOURCE	/ INPUT
CD/DVD	Changer	FM/AM
	TV	VCR	AUX
	MENU / NAVIGATION
			Settings
	Tune
	Disc
Seek	Enter
Channel
Chapter			Volume
Preset
Track
1	2		3
4	5		6
7	8		9
	0
	PLAYBACK
Stop	Pause		Play
Shuffle			Repeat

Settings ( )

Settings

System Setup Enter

System Setup (3 of 3)

Zone 2 Protocol: Legacy

10 January 4, 2002 AM262840_00_V.pdf