Problem What to do
The remote does not
control the iPod. Press iPod to reset the mode of operation
for the iPod.
You may then need to press Play/Pause to
resume play.
The iPod is on when it
should not be. If the system is off or you are playing
another source, press iPod.
Then press On/Off or another source button
(FM/AM or CD).
With the remote aimed properly, your iPod
should turn off within 2 seconds.
The volume varies
when the iPod plays
different songs.
Use the new remote Volume to set the
volume to the level you prefer for a
particular song.
The recording quality of songs varies,
producing inconsistent play volumes.
The iPod is connected
to the Multi-CD
Changer and it is on
but does not play.
Be sure the audio cable from the dock is
connected to INPUT AUX 1 on the changer.
Press iPod and check to see that AUX 1
appears on the Bose® system display.
You may then need to press Play/Pause.
The Bose® system
speakers play even
when headphones
are plugged into the
docked iPod.
Connect the headphones to the mini jack on the
Wave® system.
This silences the system so the sound plays through
the headphones only.
USING YOUR WAVE® CONNECT KIT
8
EnglishDeutschFrançaisArabic EspañolItalianoThai NederlandsS. Chin Korean
Troubleshooting
If your iPod has four buttons above the touch wheel, it is not compatible
with this Wave® connect kit.