Bose DXA2120 manual User interface accessory, Hardware Installation, User interface installation

4.0 Hardware Installation

4.6 User interface (accessory)

The FreeSpace® DXA 2120 Digital Mixer/Amplifier is designed to be compatible with the following Bose® user interfaces:

•Bose® Volume Control User Interface (PC 041966)

•Bose® Volume Control with A/B Select User Interface (PC 041967)

4.6.1 User interface installation

Volume control with A/B select user interface

4.6.1.3 Recommended cable lengths

For one user interface 2000 ft (610 m) max.

Chassis

22-24 AWG or 0.34-0.25mm2

gauge cable

For two user interfaces 2000 ft (610 m) max.

Chassis 22-24 AWG or 0.34-0.25mm2

gauge cable

4.6.1.4 User interface connections

Connect the user interface wires to the appropriate terminals on the 6-pin connector, and insert it into the REMOTE jack.

CAUTION: Use only 22-24 AWG or 0.34-0.25mm2gauge cable to connect the user interface to the mixer/amplifier.

Volume control user interface

Rear connection panel

4.6.1.1 Additional equipment required (not supplied)

Double-gang electrical box

Cable*

User interface jack with Euroblock connector

See section 4.6.1.5 for wiring diagrams.

*For the volume control user interface, use a single twisted pair of data-grade cable (22-24 AWG or 0.34-0.25mm2).

*For the volume control with A/B select user interface, use two twisted pairs of data-grade cable (22-24 AWG or 0.34-0.25mm2).

4.6.1.2 Assembly

11 of 36