Bose Lifestyle (R) VS-2 manual - page 9

9
English Deutsch FrançaisDansk Español Italiano SvenskaNederlands
Choosing connection types for your A/V devices
1. Look at the rear panel of each A/V device to determine what type of video output connectors it has.
2. In the following table, choose the type of available v ideo connector that provides the highest possible video
quality. We recommend using an HDMI connection if it is available. Place a check m ark in the tab le for the
connector type used for each of your A/V devices.
Connecting your A/V devices to the VS-2
1. Plug one end of the video cable into the appropriate video output connector(s) on your A/V dev ice.
2. Plug the other end of the video cable into the appropriate Video INPUT connector(s) on the VS-2.
3. Refer to your LIFESTYLE® system installation guide for information on making audio connections.
Video
Quality
Video
Connector VCR CBL-SAT
AUX
(Other)
Best HDMI Not
available
on VS-2
Better Component
Good S-Video
Standard Composite
VS-2
DO NOT USE
If any of your A/V devices do not have an HDMI connector, you can use any other
type of connection. Remember, the VS-2 converts these up to HDMI format.