TAB 8, 16 | TAB 7, 15 | TAB 6, 14 | TAB 5, 13 | TAB 4, 12 | TAB 3, 11 | TAB 2, 10 |
English
SOUNDDOCK® 10 BLUETOOTH® DIGITAL MUSIC SYSTEM
Setting up your system
1.Place your SoundDock 10 Bluetooth digital music system on a flat, stable surface.
2.Plug the small end of the AC power cord into the AC power connector on the back of the unit.
3.Plug the other end into a live AC (mains) outlet. After you hear two short tones from your SoundDock 10 Bluetooth system, it is ready to use.
CAUTION: Do not cover the ventilation openings of the product. The slots on the top provide ventilation for the
Note: When handling the SoundDock 10 Bluetooth system, the front structure containing the dock for iPod/iPhone may feel loose. This is normal. This part of the system is intentionally designed to prevent speaker vibration from interfering with the operation of your iPod/iPhone.
AC IN
Note: The tonal quality of your SoundDock 10 Bluetooth system will vary with placement. For example, moving the system toward a corner will increase bass response; moving it away from the corner will decrease bass response.
System on/off control
You can turn on your SoundDock 10 Bluetooth system in any of the following three ways:
•Dock a device.
•Press any key except OFF on the Bose® remote.
•Press any key on the docked device.
To turn off the SoundDock 10 Bluetooth system, do either one of the following:
•Press OFF on the SoundDock 10 Bluetooth remote.
•Remove the docked device.
2
