8

REMOVE iPod FROM THE BUILT-IN iPod DOCKING

To take out the iPod from the docking station, user can first detach the front panel, and repeat step
1 to step 8 to take out the iPod & return the iPod docking inside the unit’s cabinent.
Step 4Step 3Step 2 Step 6Step 7Step 8
Press down this button
Push the docking back
to Cabinent
Never pull out this stick unless
docking is release out.
Step 1 Step 5
Press down
Press the button as indicated below
to unlock the iPod docking.
Pull out
Pull out the iPod docking
as shown below.
Press on these buttons
on both sides as
indicated below to unlock
the iPod holder.
Pull out this stick
Pull out the iPod connected
as indicated below
by pulling out the stick.
Press toward this
lock switch
connected iPod is completely
out, user should push on
the locking buttons
on the both sides
of the iPod
connector to
release the
iPod as
indicated in the
picture, and remove the iPod unit.
Once the stick with the
Push inwards
Once the iPod unit is remove,
push the stick backward
into the iPod docking
station until it stops.
Push on the iPod holders on both
sides until they stop.
Push the iPod docking inwards into
the unit’s cabinent until a click sound
is heard.
P ress towards the iPod unit to hold the
i P od unit firmly in place