Boss Audio Systems BV7280 manual Operation, 87.50MHZ, Switching to Radio Mode, Selecting Station

OPERATION

the audio/video/photo files in the card and start to play automatically. The operation is the same with the USB operation described above.

If in other mode, you can also press MODE button to select Card mode.

The corresponding operation please refer to the USB PLAY OPERATION.

RADIO OPERATION

◆Switching to Radio Mode

Press MODE button on remote control or MODE on the front panel start radio mode. The band/frequency/station/clock and other information will display on the display.

RADIOST

87.50MHZ

BAND :FM1

STATION:M1

POP 00:03

◆Selecting the Frequency Band

Press BND button on the remote control or BAND/AMS button on the front panel to select desired band. The reception band will change in the following order:

ÆFM1Æ FM 2Æ FM3 Æ AM1 Æ AM2

◆Selecting Station

Press	/	buttons on the remote
control or press			/	on the front panel

shortly to adjust the frequency manually.

Hold Press	/		on the remote control
or hold press		/		on the front panel for

fast tuning. The frequency is updated correspondingly on display.

◆Setting Memory

Press radio preset buttons (numeric buttons 1~6) on remote control or on the front panel to preset stations at radio mode. Each band can store six preset stations. The stations might be FM1, FM2,

FM3, AM1 and AM2 band. The operation is as below:

1) Store in Memory

Press and hold desired radio preset buttons (numeric buttons 1~6) on the

remote control or on the front p anel for several seconds, the memory icon will

be	shown display and the current
listening station will be stored into the
number button.
2) Retrieve a Preset Station
Press		any one of the	radio preset
buttons		(numeric but tons	1~6) on the
remote control or on the front p anel to
retrieve a station which had been stored
in	the memory in advance and the
chosen		frequency will be shown on
display.

◆Automatic memory storing & program scanning

1) Program scanning

Shortly press AMS button on remote control to scan preset station.

2) Automatic memory storing

Press and hold press		AMS button on
the remote control or BND/AMS
button	on the front p	anel for about
several	seconds, the radio searches

from the current frequency and checks

the signal strength until one cycle

search is finished. And then st ations are stored into the preset number button in turn according to the strength of the st ations. When auto search is finished, it will e nter into preset scan mode automatically.

Note: Press and hold 1-6 numeric buttons on the remote control for about several seconds, will store the current station to the current numeric key position.

◆Mono/Stereo

Press ST button on remote control to select mono or stereo mode. Y ou can sometimes improve reception of distant stations by selecting mono operation.

17