ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF. Press one of the ^/v/>/< buttons to select the area you want to enlarge.
5.10 Change the Caption Language
When playing a DVD disc, press the SUBTITLE button repeatedly to select the language of the caption or turn off the caption.(depend on the current disc)
When playing a VCD/MP3/WMA/CD disc , the button is not available.
5.11 Change the Audio Language
1.When playing a DVD disc , press the AUDIO button repeatedly on the remote control to select the desired language type. (depend on the current disc)
2.When playing a VCD disc, press the AUDIO button repeatedly to select the sound mode of the MONO L, MONO R, MIX MONO and Stereo, no language function.
3.When playing a CD/WMA/MP3 disc, the AUDIO button is disabled.
5.12 Change the Video Signal System
During playback of DVD/VCD disc, press the BAND(P/N) button on the front panel or on the remote control repeatedly to change the VIDEO SIGNAL SYSTEM mode.
5.13 Look over the Playback Status
1.When playing a DVD disc, press the OSD button repeatedly on the remote control to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing title, the serial number of the playing chapter, the elapsed time of the playing chapter, the remained time of the playing chapter, the elapsed time of the playing title, the remained time of the playing title, etc.
2.When playing a VCD/CD disc , press the OSD button repeatedly on the remote control to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing track, the elapsed time of the playing track, the remained time of the playing track, the elapsted time of the disc, the remained time of the disc.
3.When playing a MP3/WMA disc, press the OSD button repeatedly on the remote control to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing track, the elapsed time of the playing track, the remained time of the playing track.
7. To remove the front panel
1)Press the RELEASE button on the front panel to flip down the front panel from the unit;(see fig. 1)
2)Flip down the front panel;(see fig. 2)
3)Hold the right end of the front panel and pull out the right end as arrow direc- tion, then pull out the whole front panel as arrow direction.(see fig. 3)
REL
Fig. 1 | Fig. 2 | Fig. 3 |
8. To mount the front panel
1)Insert left end of the front panel first as arrow direction, then push and hook up the right end of the front panel onto the unit;(see fig. 4)
2)Flip the front panel upward till hearing a clip.(see fig. 5 and fig. 6)
Fig. 4 | Fig. 5 | Fig. 6 |
9.To turn on/off LOUD mode
Press the LOUD button on the remote control to turn on/off LOUD mode.
When turning on LOUD mode, it will enhance bass level immediately when the bass is not enough.
10.To reset the unit
When the display is distorted or the function buttons are not working correctly or sound
is distorted, press the RELEASE button to detach the front panel from the unit, then use a needle object to press the RESET button to reset
the unit to original setting.
11.To adjust the sound equalizer curves
To adjust the sound equalizer curves, briefly and repeatedly press the SEL button to select the sound equalizer curves of VOL, BAS(without preset EQ), TRE (without preset EQ), BAL, FAD, then rotate the VOL knob on the front panel or press the + or - button to adjust level.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com