Boss Audio Systems BV7320 user manual To connect an external monitor to this unit

During slow forward, press the PLAY button to resume normal playback.

This function is only for video.

5.3 Playback with still frame

If the unit is currently playing DVD/VCD disc, press the STEP button consecutively to display the still frame forward with step by step.

Press the PLAY button to resume normal playback.

5.4 Playback Repeatedly

5.4.1 ONE/ALL Repeat

1.In the mode of DVD disc playback:

Press the RPT button to select REP CHAPTER, REP TITLE, REP ALL or REP OFF.

2.In the mode of VCD(PBC OFF)/CD disc playback:

press the RPT button to select REP ONE, REP ALL or OFF.

When it is in the state of PBC ON, during VCD disc playing, the RPT button are not available.

3.In the mode of MP3/WMA disc playback:

Press the RPT button to select REP ONE, REP DIR, REP ALL or OFF.

5.4.2 A-B Repeat

Press the A-Bbutton if you want to repeat a specific segment on a disc that you define:

1.Press the A-Bbutton at a point (A) where you want it to be the start point of the repeat segment. Press the A-Bbutton again at a point (B) where you want it to be the terminal point of the repeat segment. Then it will play the segment repeatedly.

2.To cancel the A-B repeat mode and resume normal playback, press the A-Bbutton for the third time.

Note:

During VCD/MP3/WMA/CD playback, points A and B must be within the same track.

During DVD playback, points A and B can be selected from different chapters.

4. Basic Disc, USB or MMC/SD Operation

4.1 Begin playback

1.To connect an external monitor to this unit.

Connect the video output of this unit to the video input of the external monitor, and select the right video input on the menu of the external monitor.

?Common Question

Q:There is nothing displayed on the monitor when the DVD player is turned on. How to solve this problem?

A:Ensure that the monitor was set to right video input(not TV channel); for example, if you make VIDEO1 INPUT of the monitor and DVD player connected

with each other, then you need to set the monitor input to VIDEO1.

2.Press the RELEASE button to drop down the front panel.

3.Insert a disc into the DISC SLOT(Label surface up), then flip up the front panel till hearing a clip.

!NOTE

1.Discs that are scratched, poorly manufactured or recorded in low quality, may not play.

2.If the player cannot read disc under normal condition, please try to eject and reload the disc again.

3.Remark:

1)In addition to normal CD and DVD, this unit supports to play CD-R,

CD-R/W, DVD-R and DVD-R/W as well; however, depending on the conditions of the recording equipment, recording program or the disc itself, some CD-R, CD-R/W, DVD-R or DVD-R/W may not play.

2) When dealing with CD-R, CD-R/W, DVD-R or DVD-R/W recording,

too high speed recording may result in poor signal quality and therefore, we recommend selecting the lowest recording speed as possible.

PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com