Specifications
Television RF system | NTSC M+ATSC |
Video Color System | PAL/NTSC |
Channel and frequencies | AIR CH2－CH69 CABLE CH1－CH135 |
Power input | AC 110－240V, 50/60 Hz |
Power consumption | see the ration label |
Audio output | 6W +6W (Rated output) |
Simple Troubleshooting
If the display fails or the performance dramatically, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the display still fails to perform as expected, connect the dealer for assistance.
Symptom
No Power
No Sound
No Response Of the remote control
The Screen Flash In VGA Mode
Some Interfere In The VGA Mode
Abnormal Color
Clean The TV Set
DEALING METHOD
Check the power connection.Pull the plug out, wait for 60 seconds, then reconnect the power and turn on the set.
Increase the volume. Check that if the set is on the mute state or not. Check the voice setting condition. Check the voice mode setting condition.
Check the effect of the batteries. If needed, please replace the batteries or clean the remote control sensor window. The distance between the set and the remote control should be less than 6 meters.
The parameter is too big.Please use saftey mode when restart the PC, and set the parameter of the monitor according to the instruction.
Please modify parameter of the monitor according to the instruction.
Check the antenna connection.
Please pull the plug out when clean the LCD screen. Using soft, clean cloth to wipe it off. If need to clean further, please use dr cloth, don't use naphtha or other thinner liquid.
19
