INSTRUCTIONS
Turn on/off Host
When the ignition switch is put in ACC or ON position,Press[ 
] button on the front panel to turn on the unit.After the host starts, hold [ 
]button for 3 seconds , the host will turn off.
Access main interface
In the other mode, click on the interface to return the icon will switch to the main interface.
INSTRUCTIONS
iPod function operation
Connect to iPod first, touch [iPod] icon on main interface to access iPod interface, as shown in below diagram.
Play/Pause Fast forward play/Fast backward play | Volume adjustment knob |
Touch the function icons so as to access the corresponding function operations.
USB/SD Card function operation
StopPrevious Song/next Song
External input operation
Back to the
main interface
When there is a USB device/SD card connected, the unit can conduct the playback of audio/video/ image files in the USB device/SD card.
Insert/Eject USB storage device
1.Connect a USB recorded with media information to the unit by a USB connecting cable.
2.When there is a need to eject the USB device, exit the USB device playback screen first, and then take out the device.
Insert/eject SD card
1.Insert a SD card recorded with media information into the SD card slot in the unit correctly until it is locked.
2.When pulling out the SD card, exit SD card playing state first, then press the SD card and it shall pop up after unlocking.
Enter/exit
Insert a USB storage device or SD card to automatically play data contained in it. If the unit has connected with a USB device or SD card, touch[ USB ]icon in the main interface to enter into the external storage playback interface; Touch[ SD ]icon to enter into the SD card playback interface. During playback, touch the top center area of the screen to pop up the touch menu, operate touch menu to perform various playback controls.
Play
After SD card/USB removable device being read out, the operation methods are similar to disk operation methods.
Connect the video input plug with external video input jack, and connect the audio input plug with external audio input jack.
Touch [Input] icon on main interface to access external input interface.
Audio 
You can adjust thevolume, bass, pitch for input audio.
You can adjust the speaker volume by adjusting the front and back,left and right column.
Video 
You can adjust the brightness, contrast, saturation and hue for input video. You can also choose the video standard mode.
NO VIDEO SIGNAL
Other functions
Rearview function
In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial running state after reversing the car.
Warning
Do not rely on CCD system completely, please make sure you use direct eyesight while driving.Back rearview system only assists in driving. As the distance range of rearview system is limited, completely relying on the rearview system during driving may cause accidents.
Reverse field simulation | Rearview backup image |
07 | 12 |
