Boss Audio Systems GT-6 Exchanging Patches

23
Chapter 3 Saving the Tones You Have Created
Chapter
3
Exchanging Patches
On the GT-6, you can “swap” or exchange the positions of
two User patches. The following explains how this is done.
fig.03-05
1. Select the exchange source patch (refer to “How to
Switch Patches”; p. 15).
2. Press [WRITE].
3. Press PARAMETER [ ].
The content of the display changes, and the GT-6 is
ready for the exchange destination User patch to be
specified.
fig.03-06
4. Rotate the VALUE dial to select the exchange
destination User patch.
*To cancel the exchange, press [EXIT]. The Play screen returns
to the display.
* You can also use the procedure described in “How to Switch
Patches” (p. 15) to select the exchange destination.
5. Press [WRITE].
The patch stored in the exchange source memory
location and the patch stored in the exchange destination
memory location are exchanged, and you’re returned to
the Play screen.
2,5
4
3
Destination User Patch