74
Factory Settings

Tuner

TUNER Pitch: A= 440 Hz
TUNER Out: Bypass

Output Select

Output Select: COMBO AMP

Global

Low EQ: 0dB
High EQ: 0dB
NS Threshold: 0dB
Reverb Level: 100%

System

LCD Contrast: 16
BANK Extent: 85
Patch Change Mode: Wait for a Num.
EXP Pdl Hold: On
Dial Function: PATCH No.& VALUE
Knob Mode: Immediate
Pedal Tuner SW: Off
Amp Switch Mode: Amp On/Off
Sub CTL1 Func: Assignable
Sub CTL2 Func: Assignable

MIDI

MIDI RX Channel: 1
MIDI Omni Mode: Omni On
MIDI TX Channel: Rx
MIDI Device ID: 1
MIDI Sync Clock: Auto
MIDI PC OUT: On
MIDI EXP OUT: 7
MIDI EXP SW OUT: 81
MIDI CTL OUT: 80
MIDI Sub CTL1OUT: Off
MIDI Sub CTL2OUT: Off
MIDI Map Select: Fix
Manual
1: PRE (PRE/SP SIM)
2: OD (OD/DS)
3: DD (DELAY)
4: CE (CHORUS)
▲: FX-1
▼: FX-2

Restoring the Factory

Settings (Factory Reset)

Restoring the GT-6 to the settings made at the factory is
referred to as “Factory Reset.”
Not only can you return all of the settings to the values in
effect when the GT-6 was shipped from the factory, you can
also specify the range of settings to be reset.
fig.10-301
1. Turn off the power.
2. While holding down PREAMP/SPEAKER On/Off
button and [TYPE VARIATION], turn on the power.
The Factory Reset range setting screen appears in the
display.
fig.10-302
* To cancel Factory Reset, press [EXIT].
3. Press PARAMETER [ ] [ ] to move the cursor,
and rotate the PATCH/VALUE dial to specify the range
of settings you want to restore to factory settings.
System:
System parameters, Harmonist scales, Auto Riff phrases,
and Preamp, Overdrive/Distortion, and Wah Custom
Edit parameter settings
#1-1–#35-4:
Settings for Patch Number 1-1 through 35-4
4. If you want to proceed with the factory reset, press
[ENTER].
The specified range of data will be returned, and return
to the Play screen.
1
3
3
4
1
2
The range of data you wish to factory reset.