53
Chapter
6
Chapter 6 Using the Customize Function
With the GT-6’s Customize function, you can rely on your
own sensibilities and create a totally new effect by tweaking
the settings for the “Preamp/Speaker Simulator,”
“Overdrive/Distortion,” and “Pedal Wah.” The result can
then be saved on the GT-6 as “Custom” settings.
You can also use these custom settings in other patches.

Making “Custom” Preamp

Settings

You can make three different sets of settings, Custom1,
Custom2, and Custom3.
* The sound of any patch that uses Custom 1, 2, or 3 will be
altered if the custom settings are edited.
1. Turn the PREAMP/SPEAKER TYPE knob to
“CUSTOM.”
2. Press PREAMP/SPEAKER [TYPE VARIATION] to call
up “Custom1,” “Custom2,” or “Custom3.”
fig.06-01
3. Press [PREAMP/SPEAKER].
The PREAMP/SPEAKER edit screen appears.
4. Press PARAMETER [ ] [ ] to show the custom
parameters.
fig.06-02 (Examples)
fig.06-02
5. Rotate the PATCH/VALUE dial to change the setting’s
value.
6. Repeat Steps 4 and 5 as needed.
7. Press [EXIT] to return to the Play screen.
Type
Selects the basic type of preamp.
JC Clean:
This is the sound of the Roland JC-120.
TW Clean:
This models a Fender Twin Reverb.
Crunch:
This is a crunch sound that can produce natural distortion.
VO Lead:
This models the drive sound of a VOX AC-30TB.
BG Lead:
This models the lead sound of the MESA/Boogie combo
amp.
MS1959 Stk:
This models the sound input to Input I on a Marshall 1959.
MODERN Stk:
This models the rhythm channel of a MESA/Boogie Dual
Rectifier.

Bottom -50–+50

Adjusts the amount of distortion in the low frequencies.

Edge -50–+50

Adjusts the amount of distortion in the high frequencies.

Bass Freq (Bass Frequencies) -50–+50

Adjusts the frequencies affected by the BASS knob.

Treble Freq (Treble Frequencies) -50–+50

Adjusts the frequencies affected by the TREBLE knob.

Preamp Low -50–+50

Adjusts the preamp section’s low-frequency tone.

PreampHigh -50–+50

Adjusts the preamp section’s high-frequency tone.
The trademarks listed in this document are trademarks
of their respective owners, which are separate companies
from BOSS. Those companies are not affiliated with
BOSS and have not licensed or authorized BOSS’s GT-6.
Their marks are used solely to identify the equipment
whose sound is simulated by BOSS’s GT-6.
Custom
Type
Custom
Bottom
Custom
Edge
Custom
Bass Frequency
Custom
Treble Frequency
Custom
Preamp Low
Custom
Preamp High
Custom
Speaker Low
Custom
Speaker High