Bowens BWL-0485 manual Fitting / Removing Quad Connectors to Pack, Accessories, Operation

FITTING / REMOVING QUAD CONNECTORS TO PACK

•Before use ensure that the pack is switched off.

•Fit the Ringflash Pro connectors to the pack. To ensure latch retention first insert the tab on the front of the cable plug into the pack socket (as shown in fig. 10) and then press down firmly on the cable entry end (as shown in fig. 11).

•Switch the pack ‘on’ and ‘test’ flash the Ringflash Pro to ensure operational.

•After use always make sure that the Ringflash Pro has adequate time to cool down.

•To remove the plug make sure all power to the Ringflash Pro is switched ‘off’, press the spring latch away from the plug and lift from the cable entry end (as shown in fig.12).

fig.10 fig.11 fig.12

ACCESSORIES

	Accessories available to fit the Ringflash Pro:
•	BW-7674	Ringflash Pro Reflector (fig.13)
•	BW-7675	110º Reflector with Diffuser (fig. 14)

fig.13 fig.14

OPERATION

Part Number (230V)	BW-7670
Part Number (117V)	BW-7670US
Maximum Power	4800Ws
Flash Duration (Maximum)	1/1600 sec @ 3000Ws
Flash Duration (Minimum)	1/4500 sec @ 500Ws
Guide Number	86
@ 3000Ws with 50º Keylite Reflector
Flashtube Assembly	1 x Single Tube (BW-7673)
	User Replaceable
Modelling Lamp (117V)	10 x 12V 20W G4 Halogen LAM-760 (BW-7671)
Modelling Lamp (230V)	10 x 24V 20W G4 Halogen LAM-765 (BW-7672)
Cable Length	5m
Dimensions	204mm ø x 80mm (87.5mm with Baffle)
Aperture	100mm ø
Weight (inc. Cable)	2.7Kg
Weight (inc. Camera Bracket & Cable)	3.43Kg

SPARE PARTS AVAILABLE

BW-767112V 20W G4 Halogen (for use on 117V)	BW-767224V 20W G4 Halogen (for use on 230V)
BW-7676Glass Lens (Clear)	BW-7677Glass Lens (Frosted)
BW-7673Flashtube Assembly

5 6