Assembly Step #3 Attach Console to Uprights
Console
Upper Control wire
Lower Control
Wire
Allen Screws 
Left Upright
Assembly Hardware Required: (6) M8 x P1..25 x 15 Allen Screws (item c)
Console Flanges
Allen Screws
Right Upright
This step requires two people.. The Console is awkward and heavy.. It is possible to pinch your fingers when connecting it to the Uprights..
1.With one person holding the Console in place, have the second person connect the Upper Control Wire (attached to the Console) to the Lower Control Wire (on the Left Upright)..
2.Once the Control Wire has been connected, tuck the excess wire into the Upright.. Insert the Console Flanges into the Left and Right Uprights and secure with Allen screws..
3..Before proceeding to the next step tighten all the Allen Screws on the Uprights and Phillips Head Screws on the Crossbar..
Note: Be sure not to pinch the control wire when securing the Console to the Upright.
Assembly Instructions 11
