Secure Pulley Arms, Install Slider Pulleys

Step 7 Secure Pulley Arms

•2Threaded Studs (1/2" X 9 1/2")

•4Nylock Nuts (1/2")

•4Washers (1/2")

Tool: Rubber Mallet

7-1Align the two holes in the Pulley Arms with those in the Lower Lat Tower Assembly and secure using threaded studs, washers and nuts as shown..

Nylock Nuts

Flat Washers

Threaded	Nylock Nuts
Studs

Parts:

•2 Slider Pulleys with Cable Assembly

•Main Assembly

•2 Cap Screws (1/4" X 1/2") Tools: 3/16 Hex Wrench

8-1Unwrap the Slider Pulley and uncoil the cable. .

8-2Install a Slider Pulley onto each Pulley Arm as shown. .Choose any of the four holes to secure..

8-3Install a cap screw into the underside . of each Pulley Arm, as shown..

Slider Pulley w/

Cable Assembly

Cap

Screw

Slider Pulley w/

Cable Assembly

Cap

Screw

10Bowflex Xceed™ Plus Assembly Manual