Bowflex Xceed Plus manual Install Upper Lat Tower Assembly, Tighten Hardware

Assembly Guide

Step 15 Install Upper Lat Tower Assembly

Parts:

• Upper Lat Tower Assembly

• Main Assembly

Hardware (1:1):

• 6Button Head Screws (3/8" X 3/4")

• 6Washers (3/8")

Tool: 7/32" Hex Wrench

15-1Position the Upper Lat Tower Assembly . over the Lower Lat Tower Assembly..

15-2Slide the Upper Lat Tower onto the . Lower Lat Tower and secure with screws . and washers as shown..

Upper Lat Tower

Flat	2ODS NOT SHOWN
	FOR CLARITY
Washers

Button Head

Screws

Flat

Washers

Button Head

Screws

Lower Lat Tower

Step 16 Tighten Hardware

16-1Carefully go over the entire Bowflex Xceed™ Plus home gym and tighten all hardware before proceeding to the next step. .Pay close attention to the hardware installed in Steps 1, 3, 4, and 6. .

14Bowflex Xceed™ Plus Assembly Manual