Bowflex Xceed Plus manual Assembly Guide, Base Frame Assembly, Lower Lat Tower Assembly

Assembly Guide

Step 1 Base Frame Assembly

Parts:

•	Base Frame	•	Right Frame Rail
•	Left Frame Rail	•	Rear Cross Member

Hardware:

•6Button Head Screws ( 3/8" X 3/4")

•6Flat Washers (3/8")

Left Frame Rail

Button Head Screws

Flat Washers

Tool: 7/32" Allen Wrench . (or Hex Wrench)

1-1Lay all parts on floor as shown..

1-2Insert Frame Rail . connectors into the . Base Frame and . Rear Cross Member. ..

Secure with screws . and washers as shown..

Finger tighten screws at this time.

Button Head	Rear Cross
	Member
Screws
Flat
Washers

Base Frame

Right Frame Rail

Flat Washers

Button Head Screws

Step 2 Lower Lat Tower Assembly

Parts:

•Lower Lat Tower Frame

•Rod Box with Power Rod® Pack

Hardware:

•3Self Threading Screws (#10 X 1")

•3Flat Washers (1/4")

Tool: Phillips Screw Driver

2-1Lay parts on floor as shown. . Firmly slide Rod Box into Lower Lat Tower Frame..

2-2Fasten the Rod Box to the . Lower Lat Tower Frame with . screws and washers as shown. ..

Tighten screws until snug..

Lower Lat Tower Frame

Rod Box w/ Rods

Flat Washers

Self Threading

Screws

Bowflex Xceed™ Plus Assembly Manual