BOXLIGHT CD-550m, CD-450m manual Connecting a Desktop Computer

S e t t i n g u p t h e P r o j e c t o r

NOTE: If you are connecting an older Macintosh computer that does not have a 15-pin connector, you must use the Mac adaptor between the computer and the CablePro. See “Optional Accessories” on page 46.

NOTE: The projector must be turned on to display the image on your monitor.

Connecting a Desktop Computer

1Locate the cable that connects your monitor to your computer. Unplug it from the computer.

2Plug the end of the CablePro cable into the monitor con- nector on your computer.

FIGURE 9

Connecting the CablePro cable to a desktop computer

Do you want to display the image on your computer’s monitor as well as on the projection screen?

1Plug your monitor’s cable into the connector on the CablePro.

Do you want to play your computer’s audio on the projector?

1Unplug the audio cable, if present, from your computer.

2Plug either end of the CablePro audio cable into the audio connector on your computer.

3Plug the other end of the audio cable into the connector on the CablePro.

12