BOXLIGHT CP-13t manual TOP Controls and Indicators

BEFORE OPERATION

TOP CONTROLS AND INDICATORS

NORMAL BUTTON

AUTO IMAGE BUTTON

Used to operate AUTO IMAGE function. (P28)

POWER ON–OFF BUTTON

Used to turn the projector on or off. (P20)

LAMP INDICATOR

This indicator is lit in dim when the projector is turned on. And the light is brightened when the projector is in stand-by mode.

READY INDICATOR

This indicator is lit in green when the projector is ready to be turned on.

WARNING TEMP. INDICATOR

This indicator flashes red when internal projector temperature is too high. (P42)

LAMP REPLACE INDICATOR

This indicator turns to yellow when the life of the projection lamp draws to an end. (P43)

MENU BUTTON

Used to open or close the MENU operation.

(P17, 19)

NORMAL PAGE VOLUME

LAMP

AUTO IMAGE

READY

ON–OFF MENU MODE

WARNING

TEMP.

SELECT

LAMP

REPLACE

ZOOMFOCUS

Used to reset to normal picture adjustment preset by factory. (P27, 31, 36)

PAGE BUTTONS

Used to move to the next / previous page of the data in the memory card plugged into PC CARD SLOT. These buttons are used to stop or resume AUTO- PLAY function. Page buttons are activated in MCI mode. (P34.)

VOLUME BUTTONS

Used to adjust volume. (P22)

MODE BUTTON

Used to select input source either Computer, Video or MCI mode. (P23, 30, 33)

SELECT BUTTON

Used to execute the item selected. It is also used to expand the image in DIGITAL ZOOM mode.

(P29, 37)

POINT BUTTONS

Used to select an item and adjust the value on the MENU. It is also used to pan the image in DIGITAL ZOOM mode. (P29, 37)

FOCUS BUTTONS

Used to select focus adjust. (P21)

ZOOM BUTTONS

Used to select zoom adjust. (P21)

16