COMPUTER MODE
| PICTURE IMAGE ADJUSTMENT |
| ADJUST PICTURE IMAGE MANUALLY |
1 | Press the MENU button and the |
| appear. Press the POINT LEFT/RIGHT buttons to select |
| IMAGE and press the SELECT button. Another dialog box |
| PICTURE IMAGE ADJUSTMENT Menu will appear. |
2 | Press the POINT DOWN button and a |
appear. Move the arrow to the item that you want to change by |
pressing the POINT UP/DOWN buttons. To change the value, press either the POINT RIGHT button or the POINT LEFT button.
Fine sync.
Adjust the picture as necessary to eliminate flicker from the display. (From 0 to 255.)
Total dots
The number of the total dots in one horizontal period. Adjust the number to match your PC image.
White balance (Red / Green / Blue)
Move the arrow to Red, Green, or Blue that you want to adjust. Press POINT LEFT button to adjust the color of image lighter, and press POINT RIGHT button to adjust deeper. (From 0 to 63.)
Contrast
Press POINT LEFT button to adjust the image lighter, and press
POINT RIGHT button to adjust deeper. (From 0 to 63.)
Brightness
Press POINT LEFT button to adjust the image darker, and press
POINT RIGHT button to adjust brighter. (From 0 to 63.)
Each of the keys operates as follow.
Reset 
Recalls the data previously adjusted.
Stored 
Stores the adjusted data in the memory.
Quit 
Closes the PICTURE IMAGE ADJUSTMENT Menu.
It indicates the roughly level of the item.
Move the arrow to the item and press
POINT RIGHT / LEFT button.
Close the PICTURE
IMAGE ADJUSTMENT
Menu.
NORMAL FUNCTION
The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote Control Unit). The “Normal” display will be displayed on the screen for a few seconds.
Normal
27
