40
SETTING

SETTING MENU

Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select SETTING
and press the SELECT button. Another dialog box
SETTING Menu will appear.
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to the item that you want to set, and then press
the SELECT button to set it "On" or "Off".
1
2
Blue back When this function is in the "On" position, this projector
will produce a blue image without video noise on the
screen when the video source is unplugged or turned off.
Display When this function is in the "On" position, the On-Screen
Displays always appear when adjustments are made.
(The following displays disappear by switching this
function "Off.")
●Preparation Display
(The Number-counting down Display)
●Mode Display
●Volume Display
●Mute Display
●Normal Display
The Lamp age function is designed to reset the lamp
replacement monitor timer. When replacing the lamp,
reset the lamp replacement monitor timer by using this
function. (Refer to page 43.)
Lamp age

SETTING LANGUAGE

Press the MENU button and the ON-SCREEN MENU will appear.
Press POINT LEFT/RIGHT buttons to select LANGUAGE and
press the SELECT button. Another dialog box LANGUAGE Menu
will appear.
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to the language that you want to set, and then
press the SELECT button.
1
2
The language used in the ON-SCREEN MENU is selectable
from among English, German, French, Italian, Spanish and
Japanese.
Set the Pointer
to the item, and
then press the
SELECT button.
Move the Pointer to the
language that you want
to set, and then press
the SELECT button.
Ceiling When this function is in the “On” position, the top / bottom
and the left / right reversed picture is provided to project
the image from a ceiling mounted projector.
Rear When this function is in the “On” position, the left / right
reversed picture is provided to project the image to a rear
projection screen.
Split wipe When this function is in the “On” position, the picture will
change to the next one by sliding black image side ways
like drawing black curtains. This occurs when switching
from one input source to another.

TB

TB

LR

LR