18
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
LAMP REPLACE
LAMP
WARNING TEMP.
READY
SELECT
MENU
MODE
AUTO IMAGE
PAGE ZOOM
FOCUS
VOLUME
NORMAL
ON–OFF

+

–

Used to select zoom
adjustment.
(Refer to P23.)
Used to active or terminate the
MENU operation.
(Refer to P19.)

MENU BUTTON

MODE BUTTON

AUTO IMAGE BUTTON

PAGE BUTTONS

READY INDICATOR

SELECT BUTTON

POWER ON–OFF BUTTON

FOCUS BUTTON

NORMAL BUTTON

VOLUME BUTTONS

WARNING TEMP. INDICATOR

LAMP INDICATOR

POINT BUTTONS

LAMP REPLACE INDICATOR

Used to select input source.
(Computer, Video and MCI)
(Refer to P25 and 31.)
Used to operate AUTO IMAGE
function.
(Refer to P29.)
Used to select focus adjust.
(Refer to P23.)
Used to move to the next /
previous page of the data in
the memory card plugged into
PC CARD SLOT. These
buttons are used to stop or
resume AUTO-PLAY function.
Page buttons are activated in
MCI mode only.
(Refer to P34.)
This indicator lights in green
when the projector is ready to
be turned on.
This indicator is lit in dimly lit
when the projector is turned
on. And the light is brightly lit
when the projector is in stand-
by mode.
This indicator turns to yellow
when the life of the projection
lamp draws to an end.
(Refer to P43.)
This indicator flashes red
when internal projector
temperature is too high.
(Refer to P42.)
Used to adjust volume.
(Refer to P24.)
Used to reset to normal picture
adjustment preset by factory.
(Refer to P29 and 32.)
Used to move the pointer.
(Refer to P19.)
Used to execute the item
selected or to adjust the values
in certain items on the MAIN
MENU DISPLAY.
Used to turn the projector on
or off. (Refer to P22.)

ZOOM BUTTON