23
BASIC OPERATION
ADJUSTING THE IMAGE
ZOOM Adjustment
1Press ZOOM button on the Top Control or the Remote Control to
turn into the ZOOM mode.
2Adjust the size of the image by pressing POINT UP/DOWN
button.
Press UP button to make the image larger, and press DOWN
button to make the image smaller.
ZOOM
The message disappears after 4 seconds.
FOCUS Adjustment
1Press FOCUS button on the Top Control or the Remote Control to
turn into the FOCUS mode.
2Adjust the focus of the image by pressing POINT UP or DOWN
button. FOCUS
The message disappears after 4 seconds.
PICTURE FREEZE / NO SHOW FUNCTION
Press the FREEZE / NO SHOW button on the Remote Control Unit to
freeze the picture or turn the picture into a black image. This function is
cancelled when the FREEZE / NO SHOW button is pressed again or
any other function button is pressed.
NORMAL mode
FREEZE mode
NO SHOW mode
CURSOR FUNCTION
This projector can display a cursor by pressing cursor button on the
Remote Control. The cursor can be controlled with the POINT buttons.
To terminate the Cursor Function, press CURSOR button again.
NOTE : The cursor settings set with the “Media Card Imager” is not
available in this projector.
Cursor