APPENDIX

MAINTENANCE

WARNING TEMP. INDICATOR

WARNING TEMP. Indicator flashes red when an internal temperature of a projector exceeds the normal temperature. This Indicator stops flashing when the temperature of a projector returns to normal.

When WARNING TEMP. Indicator continues to flash, check the items listed below.

1

Ventilation Slots of the projector may be blocked. In such an event, reposition the projector so that Ventilation Slots

are not obstructed.

2

Air Filter may be clogged with dust particles. Clean Air Filter by following the section AIR FILTER CARE AND

CLEANING below.

3

If WARNING TEMP. Indicator remains on after performing the above checks, Cooling Fans or the Internal Circuits may

be malfunctioning. In that case, call Boxlight at 1-800-762-5757 or 360-779-7901 for service.

AIR FILTER CARE AND CLEANING

Removable Air Filter prevents dust from accumulating on the surface of Projection Lens and Projection Mirror. Should Air Filter become clogged with dust particles, it will reduce Cooling Fans’ effectiveness and may result in internal heat build up and adversely affect the life of the projector. Clean Air Filter following the steps below:

1

Turn off the projector, and disconnect AC power cord from the

 

AC outlet.

2

Turn the projector upside down and remove Air Filter by pulling

 

the latches upward.

3

Clean Air Filter with a brush or wash out dust and particles.

4

Replace Air Filter properly. Make sure that Air Filter is fully

 

inserted.

CAUTION

Do not operate the projector with Air Filter removed. Dust may accumulate on LCD Panel and Projection Mirror degrading picture quality.

Do not put small parts into Air Intake Vents. It may result in malfunction of the projector.

AIR FILTER

Pull up and remove.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating a projector. Usage in these environments may cause poor image quality.

When using under dusty or smoky conditions, dust may accumulate on a lens, liquid crystal panels, or optical elements inside the projector. This condition may degrade the quality of a projected image.

When the above symptoms are noticed, contact Boxlight at 1-800-762-5757 or 360-779-7901 for cleaning.

CLEANING PROJECTION LENS

Follow these steps to clean Projection Lens:

1

Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.

 

Abrasive cleaners, solvents or other harsh chemicals might scratch a surface.

2

3

Lightly wipe a cleaning cloth over Projection Lens.

When the projector is not in use, replace Lens Cover.

38

Page 38
Image 38
BOXLIGHT cp-16t manual Maintenance, AIR Filter Care and Cleaning, Cleaning Projection Lens

cp-16t specifications

The BOXLIGHT CP-16T is a versatile and advanced classroom projector designed to enhance the educational experience through its innovative features and robust performance. Engineered with the latest technology, this projector is ideal for teachers, trainers, and presenters who seek to engage their audiences effectively.

One of the main features of the BOXLIGHT CP-16T is its high-resolution imaging capability. With a resolution of 1920 x 1080 pixels, it provides crystal-clear visuals that bring presentations, videos, and educational materials to life. The brightness levels reaching up to 3,500 lumens ensure that images remain vibrant and visible even in well-lit environments. This capability is particularly valuable in classrooms where lighting cannot always be controlled.

The projector utilizes advanced LED technology, which not only extends the lifespan of the lamp but also reduces energy consumption significantly. This eco-friendly approach makes the CP-16T a sustainable choice for educational institutions looking to minimize their environmental footprint. Moreover, the long-lasting LED light source can offer up to 20,000 hours of use, allowing for less frequent replacements and reduced maintenance costs.

Connectivity is another standout feature of the BOXLIGHT CP-16T. It comes equipped with multiple input options, including HDMI, VGA, USB, and wireless capabilities, enabling users to connect a variety of devices, from laptops to tablets. This versatility makes it suitable for different teaching styles and technological platforms, facilitating seamless integration into existing classroom systems.

In addition to its connectivity options, the CP-16T integrates intuitive user controls and an easy-to-navigate interface, allowing educators to set up quickly and focus on delivering their content without technical disruptions. The projector’s lightweight design fosters portability, enabling users to transport it easily from one location to another.

Another key characteristic of the BOXLIGHT CP-16T is its built-in speaker system, which provides sufficient sound output for small to medium-sized classrooms. This feature eliminates the need for additional audio equipment in basic presentations, streamlining the setup process further.

Overall, the BOXLIGHT CP-16T stands out as a powerful educational tool equipped with high-definition imaging, extensive connectivity options, energy-efficient technology, and user-friendly features designed to enhance the teaching and learning experience.