APPENDIX

TROUBLESHOOTING

Before calling your dealer or service center for assistance, check the items below once again.

1.Make sure you have connected a projector to your computer or video equipment as described in the section "CONNECTING THE PROJECTOR" on pages 11 ~ 13.

2.Check cable connection. Verify that all computer, video and power cord are properly connected.

3.Verify that all power is switched on.

4.If the projector still does not produce an image, re-start your computer.

5.If an image still does not appear, unplug the projector from your computer and check your computer monitor's display. The problem may be with your graphics controller rather than with the projector. (When you reconnect the projector, be sure to turn the computer and monitor off before you power up the projector. Turn the projector on, and then the computer.)

6.If the problem still exists, check the following chart.

Problem:

Try these Solutions

No power.

● Plug the projector into your AC outlet.

 

● Make sure READY Indicator lights.

 

● Wait 90 seconds after the projector is turned OFF when turning the projector back on.

 

NOTE : After pressing Power ON-OFF button to OFF, make sure the projector works as

 

follows:

 

1. LAMP indicator lights bright, and READY indicator is turned off.

 

2. After 90 seconds, READY indicator lights green again and the projector can be

 

turned on by pressing Power ON-OFF button.

 

● Check WARNING TEMP. indicator. If the indicator flashes red, the projector cannot be

 

turned on.

 

(See "TURNING ON/OFF PROJECTOR" section on page 19.)

 

● Check Projection Lamp. (Refer to page 39.)

 

 

Image is out of

● Adjust focus of the projector.

focus.

● Make sure the projection screen is at least 5.3’ (1.6m) from the projector.

● Check Projection Lens to see if it needs cleaning.

 

 

NOTE : Moving the projector from a cool temperature location to a warm temperature

 

location may result in moisture condensation on Projection Lens. In such an event,

 

leave the projector OFF and wait until condensation disappears.

 

 

Picture is Left/Right

● Check Ceiling / Rear feature. (See “SETTING” section on page 35.)

reversed.

 

 

 

Picture is

● Check Ceiling feature. (See “SETTING” section on page 35.)

Top/Bottom

 

reversed.

 

 

 

Some displays are

● Check Display feature.(See “SETTING” section on page 35.)

not seen during the

 

Operation.

 

 

 

No image.

● Check the connection between your computer or video equipment and a projector.

 

● When turning a projector on, it takes about 30 seconds to display an image.

 

● Check the system that you select is corresponding with your computer or video

 

equipment.

 

● Make sure the temperature is not out of Operating Temperature (5°C ~ 35°C).

No sound.

● Check audio cable connection from audio input source.

 

● Adjust the audio source.

 

● Press VOLUME (+) button.

 

● Press MUTE button.

 

 

40

Page 39 Page 41
Page 40
Image 40
BOXLIGHT cp-16t manual Troubleshooting
Page 39 Page 41

cp-16t specifications

The BOXLIGHT CP-16T is a versatile and advanced classroom projector designed to enhance the educational experience through its innovative features and robust performance. Engineered with the latest technology, this projector is ideal for teachers, trainers, and presenters who seek to engage their audiences effectively.

One of the main features of the BOXLIGHT CP-16T is its high-resolution imaging capability. With a resolution of 1920 x 1080 pixels, it provides crystal-clear visuals that bring presentations, videos, and educational materials to life. The brightness levels reaching up to 3,500 lumens ensure that images remain vibrant and visible even in well-lit environments. This capability is particularly valuable in classrooms where lighting cannot always be controlled.

The projector utilizes advanced LED technology, which not only extends the lifespan of the lamp but also reduces energy consumption significantly. This eco-friendly approach makes the CP-16T a sustainable choice for educational institutions looking to minimize their environmental footprint. Moreover, the long-lasting LED light source can offer up to 20,000 hours of use, allowing for less frequent replacements and reduced maintenance costs.

Connectivity is another standout feature of the BOXLIGHT CP-16T. It comes equipped with multiple input options, including HDMI, VGA, USB, and wireless capabilities, enabling users to connect a variety of devices, from laptops to tablets. This versatility makes it suitable for different teaching styles and technological platforms, facilitating seamless integration into existing classroom systems.

In addition to its connectivity options, the CP-16T integrates intuitive user controls and an easy-to-navigate interface, allowing educators to set up quickly and focus on delivering their content without technical disruptions. The projector’s lightweight design fosters portability, enabling users to transport it easily from one location to another.

Another key characteristic of the BOXLIGHT CP-16T is its built-in speaker system, which provides sufficient sound output for small to medium-sized classrooms. This feature eliminates the need for additional audio equipment in basic presentations, streamlining the setup process further.

Overall, the BOXLIGHT CP-16T stands out as a powerful educational tool equipped with high-definition imaging, extensive connectivity options, energy-efficient technology, and user-friendly features designed to enhance the teaching and learning experience.
Top Page Image Contents