SETTING

Power management

This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.)

Power Management function operates to turn Projection Lamp off when the input signal is interrupted and any button is not pressed over 5 minutes. This function operates as follows;

1.When any input signal is interrupted, “No signal” and the counting down display appears (for 5 minutes).

2.After counting down for 5 minutes, Projection Lamp and READY Indicator are turned off. (Cooling Fans keep running.)

3.READY Indicator starts to flash after cooling down Projection Lamp for about 90 seconds (Power Management mode).

In this Power Management mode, Projection Lamp is automatically turned on when the input signal is connected or projector is operated with any button on Top Control or on Remote Control Unit again.

On start

When this function is “On,” projector is automatically turned on just by connecting AC Power cord to a wall outlet.

Note ; Be sure to turn projector off properly (refer to the section “TURNING OFF THE PROJECTOR” on P19). If projector is turned off in the wrong steps, On Start function does not operate properly.

Remote control

This projector has two different remote control codes; the factory-set normal code (Code 1) and the secondary code (Code 2). This switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment together.

When operating projector in “Code 2,” both projector and Remote Control Unit must be switched to “Code 2.”

To change the code of Projector;

Set Remote control in the SETTING MENU to “Code 2.”

To change the code of the Remote Control Unit;

Press both MENU and IMAGE buttons on Remote Control Unit together for over 10 seconds.

After changing the code, make sure Remote Control operates properly.

To return to the normal code (Code 1), operate both projector and Remote Control in the ways above again.

NOTE : When batteries of Remote Control Unit are replaced or ALL- OFF switch is turned to “ALL-OFF,” the remote transmit code automatically returns to the normal code (Code 1).

Lamp counter reset

This function is used to reset Lamp Replace Counter. When replacing Projection Lamp, reset Lamp Replace Counter by using this function. Refer to page 39 for operation.

Time left until Lamp off.

Press SELECT button at this icon to display other items.

Press SELECT button at this icon to display previous items.

Move the pointer to the item and then press POINT LEFT/RIGHT button(s).

Move the pointer to Lamp counter reset and then press SELECT button. The message “Lamp replace counter reset?” is displayed.

36

Page 35 Page 37
Page 36
Image 36
BOXLIGHT cp-16t manual To change the code of Projector, To change the code of the Remote Control Unit
Page 35 Page 37

cp-16t specifications

The BOXLIGHT CP-16T is a versatile and advanced classroom projector designed to enhance the educational experience through its innovative features and robust performance. Engineered with the latest technology, this projector is ideal for teachers, trainers, and presenters who seek to engage their audiences effectively.

One of the main features of the BOXLIGHT CP-16T is its high-resolution imaging capability. With a resolution of 1920 x 1080 pixels, it provides crystal-clear visuals that bring presentations, videos, and educational materials to life. The brightness levels reaching up to 3,500 lumens ensure that images remain vibrant and visible even in well-lit environments. This capability is particularly valuable in classrooms where lighting cannot always be controlled.

The projector utilizes advanced LED technology, which not only extends the lifespan of the lamp but also reduces energy consumption significantly. This eco-friendly approach makes the CP-16T a sustainable choice for educational institutions looking to minimize their environmental footprint. Moreover, the long-lasting LED light source can offer up to 20,000 hours of use, allowing for less frequent replacements and reduced maintenance costs.

Connectivity is another standout feature of the BOXLIGHT CP-16T. It comes equipped with multiple input options, including HDMI, VGA, USB, and wireless capabilities, enabling users to connect a variety of devices, from laptops to tablets. This versatility makes it suitable for different teaching styles and technological platforms, facilitating seamless integration into existing classroom systems.

In addition to its connectivity options, the CP-16T integrates intuitive user controls and an easy-to-navigate interface, allowing educators to set up quickly and focus on delivering their content without technical disruptions. The projector’s lightweight design fosters portability, enabling users to transport it easily from one location to another.

Another key characteristic of the BOXLIGHT CP-16T is its built-in speaker system, which provides sufficient sound output for small to medium-sized classrooms. This feature eliminates the need for additional audio equipment in basic presentations, streamlining the setup process further.

Overall, the BOXLIGHT CP-16T stands out as a powerful educational tool equipped with high-definition imaging, extensive connectivity options, energy-efficient technology, and user-friendly features designed to enhance the teaching and learning experience.
Top Page Image Contents