Brada Appliances YPL3-10C instruction manual Water Drainage, Maintenance, Cleaning, Air filter

WATER DRAINAGE

This product has a self-evaporative system. The condensing water will be recycled to cool the condenser. This can not only improve cooling efficiency, but also save energy for you.

· If the inside water is full, the display panel will display “FL”, and the compressor will stop

running.

·Please turn the machine off and move the machine to the place where can drain water, and

then unplug the water-draining hole. After drainage, you can power it on and the machine will

run again.

MAINTENANCE

Note: Turn off the unit and unplug it before any maintenance or repair begins to avoid electric shock.

Cleaning

·Unplug the unit before any cleaning.

·Clean the housing with a soft moisture cloth. Do not use chemical solvent (such as benzene, alcohol, gasoline). The surface may be damaged or even the whole case may be deformed.

·Do not sprinkle water on the unit.

Air filter

·Clean the air filter every 2 weeks. If the air filter is blocked with dust, the efficiency will reduce.

·Open the air filter cover upwards, and then take out the air filter.

·Wash the air filter by immersing it gently into warm (about 40℃)w aterw ith a neutraldetergent,rinse itand dry it thoroughly in a shaded place.

13