WARNING

For protection against excessive temperatures and pressure, install temperature and pressure protective equipment required by local codes, but not less than a combination temperature and pressure relief valve certified by a nationally recognized testing laboratory that maintains periodic inspection of production of listed equipment or materials, as meeting the Requirements for Relief Valves and Automatic Gas Shutoff Devices for Hot Water Supply Systems, ANSI Z21.22, and the Standard CAN1-4.4 Temperature, Pressure, Temperature and Pressure Relief Valves and Vacuum Relief Valves. The combination temperature and pressure relief valve must be marked with a maximum set pressure, not to exceed the maximum working pressure of the water heater. The combination temperature and pressure relief valve shall also have an hourly rated temperature steam BTU discharge capacity not less than the hourly input rating of the water heater.

Install the combination temperature and pressure relief valve into the opening provided and marked for this purpose on the water heater

Note: Some models may already be equipped or supplied with a combination temperature and pressure relief valve. Verify that the combination temperature and pressure relief valve complies with local codes. If the combination temperature and pressure relief valve does not comply with local codes, replace it with one that does. Follow the installation instructions above on this page.

Install a discharge line so that water discharged from the combination temperature and pressure relief valve will exit within six (6) inches (15.3 cm) above, or any distance below the structural floor and cannot contact any live electrical part. The discharge line is to be installed to allow for complete drainage of both the temperature and pressure relief valve and the discharge line. The discharge opening must not be subjected to blockage or freezing. DO NOT thread, plug or cap the discharge line. It is recommended that a minimum of four (4) inches (10.2 cm) be provided on the side of the water heater for servicing and maintenance of the combination temperature and pressure relief valve.

Do not place a valve between the combination temperature and pressure relief valve and the tank.

Water Connections continued-

9

Page 8 Page 10
Page 9
Image 9
Bradford-White Corp 238-16152-00F instruction manual Water Connections
Page 8 Page 10

238-16152-00F specifications

Bradford-White Corporation is a well-known name in the water heating industry, offering innovative products designed for both residential and commercial applications. Among its extensive lineup, the Bradford-White Corp 238-16152-00F is a standout model that showcases the company's commitment to quality, efficiency, and advanced technology.

The 238-16152-00F is primarily recognized as a gas water heater, built to provide reliable hot water for various needs, from domestic use to larger applications. One of the main features of this model is its high energy efficiency, which contributes to lower utility bills and reduced environmental impact. The unit is designed with advanced insulation technologies and a robust heat exchanger that ensures optimal heat retention and transfer.

Safety is a top priority in the design of the 238-16152-00F. It includes multiple safety features such as a temperature and pressure relief valve, which prevents potential hazards associated with thermal expansion and pressurization. The model is also equipped with an electronic ignition system that enhances reliability while minimizing the risk of pilot light outages. This technology ensures that the heater ignites only when there is a demand for hot water, leading to increased energy efficiency.

Another significant characteristic of the 238-16152-00F is its user-friendly interface, which allows for easy adjustments and monitoring of water temperature settings. This feature is especially beneficial for homeowners who want to customize their hot water experience according to their specific needs.

The build quality of Bradford-White products, including the 238-16152-00F, is exceptional. Constructed with durable materials, the tank is designed to resist corrosion, ensuring longevity and reliability. Additionally, the unit often incorporates features such as a self-cleaning mechanism, which helps to reduce sediment buildup and maintain efficiency over time.

With its combination of efficiency, safety features, and robust construction, the Bradford-White Corp 238-16152-00F is an excellent choice for anyone in need of a dependable water heating solution. Whether for residential spaces or commercial facilities, this model exemplifies the innovation and quality associated with Bradford-White, making it a preferred option in the market.
Top Page Image Contents