28
TO INCREASE SETPOINT TEMPERATURE
Step 1: Depress and hold “Temperature Up” button until desired setpoint temperature appears in the display.
Step 2: “Setpoint” indicator begins flashing in the display after pressing “Temperature Up” button.
Step 3: Press “SET” button for new setting to take effect immediately. “Setpoint” will stop flashing. If the “SET” button is
not pressed, the new temperature setting will take effect in approximately 10 seconds.
SELECT SET
Status
°F
idle
Operational
Step 1
SELECT SET
Status
°F
idle
setpoint
Operational
Step 2
"Setpoint"
flashes
SELECT SET
Status
°F
idle
setpoint
Operational
Press SET Button for setting to
to take effect immediately
Step 3"Setpoint" flashes