Bradley Smoker HN200 Installation Instructions …, Make plumbing connections

	ADA Compliant Recess-Mounted Shower
Installation Instructions	HN200

Installation Instructions continued…

Step 2: Make plumbing connections

NOTE: Hoses need to be connected to 1/2" NPT pipe supply before the shower is fastened to the wall.

1.Make water supply connections to the stainless steel hoses (see Figure 2). Equa-Flo™ and Thermostatic= 1/2" NPT Hot and Cold supplies. Single Valve, Accu-Zone™ Infrared Control, Air Valve and Touch Time™ = 1/2" tempered supply.

Step 3: Install face plate and grab bar

1.Position the face plate on the wall. Mark the wall and install twelve wall anchors suitable for use with 1/4"-20 x 3/4" button head Allen key screws (see Figure 3).

2.Attach the face plate to the wall with twelve 1/4"-20 x 3/4" button head Allen key screws provided (see Figure 3).

3.Attach the grab bar to the wall.

• Position the “L” of the grab bar to fit the back wall of the

shower stall.
		VALVE LEFT
4. Use the flange as a template and mark the six screw hole
		SEAT RIGHT
	Figure 2
locations and install six anchors supplied by installer for
1/4"-20 x 1-1/4" flat head Allen key
screws (see Figure 3).
5. Secure the grab bar to the six wall
anchors using six 1/4”-20 x 1-1/4"
flat head Allen key screws (provided
by installer) (see Figure 3).

				1/4"-20 x 3/4"
				BUTTON HEAD
				ALLEN KEY SCREW
				(12) PLACES
				(160-143)
		FACE PLATE
NOTE: ALL WALL					GRAB BAR
ANCHORS SUPPLIED					(S53-184)
BY INSTALLER.
			1/4"-20 x 1-1/4"
			FLAT HEAD ALLEN
			KEY SCREW
Figure 3	VALVE LEFT - SEAT RIGHT

Bradley Corporation • 215-1189 Rev. F; EN 02-342 5