Important Safety Instuctions
Your Bar Code Printer has been designed to give you many years of safe, reliable service. As with all electrical equipment, there are a few basic precautions you should take to avoid getting hurt or damaging the Printer.
∙Carefully read the installation and operating instructions provided with your Printer.
∙Read and follow all warning instruction labels on the Printer itself.
∙Place the Printer on a flat, firm, solid surface.
∙To protect your Printer from overheating, make sure all openings on the Printer are not blocked.
∙Do not place the Printer on or near a heat source, (i.e., a radiator or heat register).
∙Do not use your Printer near water, or spill liquid of any kind into it.
∙Be certain that your power source matches the rating listed on the bottom of the Printer. If you are unsure, check with your dealer or with your local power company.
∙Do not place the power cord where it will be walked on. If the power cord becomes damaged or frayed replace it immediately.
∙Do not insert anything into the ventilation slots or openings on the Printer.
∙Only qualified, trained service technicians should attempt to repair your Printer.
