Printer-Applicator-System PAM 300046
Standard Operation
NOTICE !
Before starting the first print job after switching on the printer it is necessary to
synchronize the label feed :
Press the key to generate a synchronous running. Remove the processed labels
manually.
Start the print job.
Start the labelling process via PLC interface.
With every start signal received by the PLC interface the printer performs one application
cycle.
Printhead is moved down.
Label is printed.
Printhead is moved up.
Pad is moved to the peel-off table, vacuum is switched on.
Label is peeled off by moving back the peel-off table and taken by the pad of the applicator
module.
Pad is driven to move back into the upper end position.
Peel-off table is driven to move back into the front position.
Label is transported into the labelling position, vacuum is switched off.
Label is placed onto the product.
Pad is driven to return in its upper end position.
Now the printer-applicator-system is ready for the next cycle.
If an error occurs while the printer-applicator-system is operating, this is shown in the display
(for types of errors and how to treat them see appendix A).