49Printer-Applicator-System PAM 3000
Key Assignment
The printer can easily be adjusted to the keyboard configuration of the particular country by
using the setup parameter "Country". For each of the available settings the printer has a
different table of key assignment, which, generally, complies with the assignment under
Microsoft DOS.
The [ALTGR] key has no function. Therefore, all signs which are located on the right hand
side of the key opposite of the normal characters (e.g. { } [ ] \) can be generated by pressing
the [ALT] key.
A few of the other special signs (e.g. ¨ × ÷) may also be generated the same way.
Other special characters (e.g. ñ ç ) can be generated by inserting two characters one after
the other, where the second input is a combination with the [ALT] key.
Some of the special characters cannot be shown in the display of the printer. In that case, the
PAM 3000 will use a character which looks similar to the required character.
NOTICE !
When using a scanner, the character set of the scanner has to be the same as
used by the printer.
Special Key Functions
[F1] To enter the list of labels stored on the memory card.
[á],[â] To scroll up/down the list of labels on the memory card.
[ENTER] or Without a current print job : to switch between ONLINE and OFFLINE;
[RETURN] While processing a print job : to confirm the data input.
[Shift]+[Del] To delete the input line.
[ESC] To cancel the data input. (while printing same effect as CANCEL)
[SPACE] While printing same effect as PAUSE.
[F2] To repeat the print of the last label. (as command A 1 CR)
[F3] To repeat the print of the last label including a new enquiry for variable data.
[Shift]+[F6] To start the self test printout.
[F7] Printer Info Display
[F8] Form feed